Description
Trakker DB7-R 3 Rod Bite Alarm Set
After 5 years of development and complete design from the ground up, the dB7-R Alarm range has been created to ensure that they meet the highest standards of performance and reliability.
Our team has worked tirelessly to integrate advanced features and technology into these alarms, resulting in a product for anglers who demand the very best.
They are much more than just an ‘off the shelf’ product with some branding on the outer case.
An industry-first feature is our PPS (Power-On Protection System), which prevents accidental power-ups and wasted battery life.
This feature ensures that the alarms are always ready to use when you need them and that you never have to worry about running out of power at a critical moment.
The dB-Mag Roller has 8 precision magnets and a high-performance O-ring, providing true indication for all conditions.
We have incorporated our ISM (Intelli-Sense Mode) into all sensitivity settings.
This function eliminates false indications, allowing you to fish effectively in extremes. Combat crashing waves, high winds, and boat fishing scenarios without compromising vital indication information when it’s needed most.
Built with a tough ABS weatherproofed case and battery compartment.
The digital circuitry and internal component weatherproofing further ensure that these alarms will perform reliably in all conditions.
The SRT (Sync-connect Receiver Technology) built into these alarms is designed for long-range and obstacle-link signal optimisation.
This advanced technology ensures that you always receive a strong and reliable signal, no matter the terrain or obstacles in your way.
The alarms feature a Tru-tone cone speaker for loud frequency delivery as well as a dual-descent tone drop-back differential for enhanced audible indication.
The dual super-bright multi-colour LEDs allow you to easily change from red, green, blue, yellow, purple, and white.
Peek-view LED positioning further enhances the visual indication from side-on viewing positions.
One-touch night light function, solid latching LED forward indication, flashing latching LED drop-back indication, dedicated indexed volume control wheel (8 volume settings including silent), indexed tone control wheel (8 tone settings), indexed sensitivity control wheel (8 sensitivity settings), power out socket (2.5mm) for use with illuminated indicators, and low battery warning.
Rod-friendly rubber inlay grips, a rigid 3/8" stainless steel thread and a blackout locking nut.
They require a single PP3-9V battery, making them easy to use and maintain.
The single 9V power source ensures longer life and better signal strength.
DB7-R Receiver
Our db7-R Receiver is designed to pair seamlessly with our dB7-R Bite Alarms.
This receiver has been engineered to meet the highest standards of performance, reliability, and most importantly, ease of use, making the dB7-R range the perfect no-nonsense companion for serious anglers.
We are confident that after using them for a session, you won’t have to refer to instruction manuals, rewatch setup videos, or learn complex button pressing sequences to use them.
Like our bite alarms, the receiver features a PPS (Power-On Protection System), which prevents accidental power up and wasted battery life.
The tough ABS weatherproofed case and battery compartment ensure that this receiver can withstand even the most demanding conditions.
The digital circuitry and internal component weatherproofing further ensure that this receiver performs reliably in all conditions.
The built-in SRT (Sync-connect Receiver Technology) is designed for long-range and obstacle-link signal optimisation.
This advanced technology ensures that you always receive a strong and reliable signal from your bite alarms.
Easily connect and update alarms, 4 per channel (16 total), and customise your setup to suit your individual preferences.
Plus, the alarm tone and LED colour are automatically updated on the receiver when adjusted on the alarms, and the receiver has an inbuilt memory that allows you to swap batteries in the alarms and the receiver itself without having to reprogram them again.
The Tru-tone cone speaker ensures loud frequency delivery when required, and our D-Vibe vibration setting transmits a pulse per bleep in both audible and silent modes.
The LER (Last Event Recall) function indicates the last event sent to the receiver, ensuring that you never miss an occurrence even if you’re a bit slow to wake up to an indication at night.
The indexed volume control wheel (8 volume settings, including silent) ensures that you can adjust the sound level to your preference; this feature is audible on the receiver.
A low battery warning ensures that you are always aware of your battery levels.
The receiver will indicate via LED flashes which alarm is low on battery and if its own battery is running low.
The ergonomic self-standing case design makes it easy to use, and as the name suggests, it stands up on its own on your bivvy table, bucket lid, or any other flat surface you decide to put it on.
You can also carry it wherever you go with the supplied lanyard.
The receiver is powered the same as the alarm and requires a single PP3 9V battery.
dB7-R Alarm Set 3+1
The dB7-R Alarm, Receiver and 3-rod presentation sets are available separately. Designed for anglers who demand the very best in performance and reliability with advanced features and simple, no-nonsense functionality.
PRODUCT FEATURES:
-
PS (Power-On Protection System) stops accidental power up and wasted battery
-
ISM (Intelli-Sense Mode) eliminates false indication in rough weather and boat fishing
-
Db-Mag Roller features 8 precision magnets and a high-performance O-ring for true indication in all weather conditions
-
Tough ABS weatherproofed case and battery compartment designed for the most demanding of conditions
-
Digital circuitry and internal component weatherproofing
-
Built-in SRT (Sync-Connect Receiver Technology) for long range and obstacle link signal optimisation
-
Tru-tone cone speaker for loud frequency delivery
-
Dual-descent tone drop-back differential
-
Dual super bright multi-colour LEDs, easily change from red, green, blue, yellow, purple & white
-
Peek-view LED positioning aids visual indication from side to side
-
One-touch night light function, both LEDs illuminate to 25% brightness
-
Solid latching LED for forward indication
-
Flashing latching LED for drop-back indication
-
Indexed volume control wheel (8 volume settings, including silent)
-
Indexed tone control wheel (8 tone settings)
-
Indexed sensitivity control wheel (8 sensitivity settings)
-
Power out socket (2.5mm) for use with illuminated indicators
-
Low battery warning
-
Rod-friendly rubber inlay grips
-
Rigid 3/8" stainless steel thread and blackout locking nut
-
Requires 1 x PP3 9V battery
-
Db7-R Receiver and 3-rod presentation sets available separately
-
Supplied with a Sure-Fit protective rubber case
TECHNICAL SPECIFICATION:
dB7-R Receiver
PRODUCT FEATURES:
-
PPS (Power-On Protection System) stops accidental power up and wasted battery
-
Tough ABS weatherproofed case and battery compartment designed for the most demanding of conditions
-
Digital circuitry and internal component weatherproofing
-
Built-in SRT (Sync-Connect Receiver Technology) for long range and obstacle link signal optimisation
-
Easily connect and update alarms, 4 per channel (16 total)
-
Alarm tone and LED colour are automatically updated on receiver when adjusted on alarms
-
Tru-tone cone speaker for loud frequency delivery
-
D-Vibe vibration setting transmits pulses per bleep and in silent mode
-
LER (Last Event Recall) indicates the last event sent to the receiver
-
Indexed volume control wheel (8 volume settings, including silent)
-
Low battery warning
-
Self-standing case design
-
Requires 1 x PP3 9V battery
-
Supplied with lanyard
TECHNICAL SPECIFICATION:
Care & Use Statements:
-
The dB7-R Alarm and Receiver are fully weatherproof; however, it is advised after use in extreme wet conditions to allow the unit/units to air dry.
-
Your dB7-R Alarm is supplied with its own protective case to keep it safe in transit; please remove this when air drying.
