ESP PVA Mesh RefillPVA Mesh Refills come in two sizes 20-25mm and 32mm and are designed to fit directly onto the tubes supplied in the PVA Kits.
Features:
Nominal 6m Length
Ultra Fine Thread
Strong Anti-Ladder Construction
Smaller Knots
Controlled Meltdown
No Solvent Residue
Economic Refill
ESP PVA Bags MK2The special PVA film is tough & strong, yet melts down without residue and most importantly, does so within the correct time frame.
Many thin film bags begin meltdown on the descent and release the bait prematurely.
Plain PVA Bags are suitable for use with oil-based liquid additives and flavourings.
The perforated PVA Bags have multiple small holes over their whole surface so pockets of air cannot remain trapped inside the bag.
This makes them ideal for distance casting and ensures they sink rapidly in deep water.
When fully loaded with pellets, oil-based liquids and the lead, sock bags can weigh up to 6.5oz (184g)
Provided the lead is placed right at the bottom of the bag, its long narrow shape maintains good casting range and accuracy.
Bulk bags can be packed out with large amounts of boilies and particles.
The PVA film is tough and impact resistant but when fully loaded with bait and lead, they can weigh up to 7.5oz (212g) so casting range is restricted.
Multi bags can weigh up to 4.5oz (127g), allowing a decent amount of bait to be delivered accurately.
The tough film survives the impact and reaches the bottom in deep water.
Mini bags are the smallest of the range so they are ideal for distance casting. The consistent, residue-free breakdown ensures the whole bag will reach the bottom even in deep water.
FEATURES
Plain or perforated
Special PVA film is tough & strong
Melts down without residue
ESP Buoyant Sweetcorn
Ideal for carp, tench and big bream, different sizes can be used alone or combined with natural corn to counterbalance the weight of the hook or create the perfect pop up.
The Buoyant Sweetcorn has a very generous 16 grains in the packet (6 large, 6 medium, 2 small and 2 mini) plus two strips of complimentary mini yellow hairstops.
An innovative feature is the hair stop recess on selected grains which accepts the mini hair stop.
Some of the grains have the recess on the end whilst others have the recess on the side to suit various presentations.
This recess makes the hair stop sit almost flush with the surface of the corn which not only looks very neat but is also a real help when fishing waters where crayfish are present, it makes it much more difficult for them to steal the bait!
There are also grains with no hair stop recess at all.
Buoyant Sweetcorn is perfect for a wide variety of presentations from balancing or tipping boilies or nuts, to creating the perfect pop up.
The larger sizes are also ideal for zig rigs.
The vibrant ‘nature identical’ yellow colour provides excellent visual attraction whilst the creamy sweetcorn flavour impregnated during the moulding process offers an attractive scent.
Features:
16 grains in the packet (6 large, 6 medium, 2 small and 2 mini)
Two strips of complementary yellow Hairstops
Buoyant
Hairstop recess
ESP Camo Hair Rig GripperExpertly tied to exacting standards using ESP Camo Sink Link braid and ultra-sharp and durable Cryogen Gripper hooks.
The integrated Streamliner Rig Sleeve over the size 9 swivel helps prevents tangles on the cast.
Optimum hair length in relation to the hook size, Hair Stops and Extender Stops are included.
The Extender Stops are very handy if a larger bait is required or for snowman type baits.Features:
Each pack contains three rigs
Micro Barbed and barbless Cryogen Gripper hook
Tied to 9" (23cm) of ESP Camo Sink Link
ESP HairstopsHaving miniature tapered ends, they feed easily into the smallest hair loop, even one which is wet and has stayed closed.
The narrow-waisted middle provides a secure seat for the loop and the miniature dumbbell shape holds the stop firmly in place.
Features:
200 per packet
Available in mini (4.7mm) and small (6mm)
Dumbbell shape
Tapered ends
ESP Catapult
Particle PultThis Particle Pult is designed to maximize distance and minimize spread with a range of popular baits including pellets, sweetcorn, tiger nuts and hemp.
Unlike boilies, particle baits can be difficult to catapult any distances beyond about 15 to 20 metres.
Avoid prolonged exposure to sunlight/weathering and natural latex will last longer.
Features:
Designed for short to medium range work
Latex
Minimum spillage
Tight grouping
Mega PultDesigned for short to medium range work, a full pouch of bait can weigh up to 3 1/2 oz (100g) which means a whole kilo of boilies can be introduced in a matter of minutes.
Accuracy and smooth delivery of bait is achieved using optimum lengths of natural latex which has a unique elasticity and power.
Latex is a natural material with a limited lifespan and should be replaced regularly.
Features:
Designed for short to medium range work
Latex
Minimum spillage
Tight grouping
Boilie PultThe pouch capacity is approximately 10 x 18mm or 16 x 15mm boilies and with a little practice, tight groupings of baits can be achieved at distances of around 40 metres. Reduce the quantity and weight of bait for increased distance.
< Latex is a natural material with a limited lifespan and should be replaced regularly.<
Features:
Special cone-shaped pouch
Natural rubber latex
Minimum spillage
Tight grouping
ESP Tungsten Loaded Hooklink 20lb
Soft / Semi Stiff
The tough, matt camo tungsten coating sinks heavily and strips easily while being resilient to fracturing on knots. Straightens without steaming.
The super strong Dyneema core has an achievable knot strength of over 30lb.
This soft version is perfect for subtle presentations with hook baits such as small boilies and nuts. Balanced or buoyant baits combined with the inherent suppleness of the braid will help the rig settle perfectly while still pushing the bait away from the lead.
The semi-stiff version is outstanding as an all-round coated hooklink. When combined with larger hooks and boilies it is still rigid enough to push the bait away from the lead for optimum rig efficiency and also makes an excellent boom for hinge & Ronnie rigs.
Available in muted camo weedy green, camo brown and choddy silt. Supplied on a 10m designer spool to fit the popular tackle boxes.
Tried, tested and perfected in conjunction with Terry Hearn.
Features:
10m designer spool
Sinks without putty
Superb abrasion resistance
Matt, camo coating
Ultra-strong
Dyneema core
Strips easily
Straightens without steaming
20lb+
X-Stiff
Due to public demand for a stiffer version of the hugely popular Tungsten Loaded hooklink, we are introducing the X-Stiff. Featuring the same, super soft internal braid as the Soft and Semi-Stiff, with the same overall diameter, colours and breaking strain, the X-Stiff has extra inherent rigidity, which pushes the hookbait away at full extension from the lead while also preventing tangles, making it an excellent choice for distance casting and also as a boom section for Ronnie and Hinge rigs and stiff D rigs.
Tungsten Loaded sinks without addition of putty
Superb abrasion resistance
Matt, camo coating provides excellent camouflage
Ultra-strong dyneema core
Strips easily without fracturing on knots
Straightens off the spool or can be steamed
Available in weedy green, camo brown and choddy silt.
Designer spool eliminates waste, fits tackle boxes.
Features:
10m designer spool
Sinks without putty
Superb abrasion resistance
Matt, camo coating
Ultra-strong
Dyneema core
Strips easily
Steam for best straightening results
20lb+
ESP Tungsten Putty
Tungsten Putty provides all the key elements that make an excellent rig putty suitable for various applications.
Optimum density means just the right amount can be moulded around a swivel or hook link to provide efficient rig mechanics for balancing pop-ups on a variety of presentations.
The putty’s adhesive properties ensure it stays in place on the cast and during use and it hardens slightly in water ensuring excellent durability.
The inherent elasticity makes the putty easy to mould and with any relatively hard putty it becomes more malleable as it is warmed in the hands or this process can be aided in cold conditions with heat from a lighter or warm surface.
For best results, pinch a small amount of putty off and mould and stretch to improve malleability and adhesion.
Once moulded around a swivel or hook link, small amounts can carefully be trimmed off with scissors to achieve critically balanced rig presentations.
Available in weedy green, camo brown and choddy silt so the putty can be matched to the lake bed or the different colours can be moulded together to create a multi camouflage putty.
Supplied in handy little ‘tackle box friendly’ screw top jars containing 25g of putty.
Features:
25g
Optimum density
Excellent adhesion & durability
Tackle box friendly screw-top jar
ESP Tungsten Loaded Tube
Tungsten Loaded Tube is significantly heavier than leadcore and is exceptionally supple, so it follows lake-bed contours, keeps the last few feet of mainline protected and anchors it hard to the bottom.
The 0.65mm internal bore is easy to thread, even accepting tapered leaders and the outside diameter is a good fit for a variety of tail rubbers and rig sleeves.
Features:
Significantly heavier than leadcore
Follows the bottom
Protects line from damage
Anchors line hard to the bottom
0.65mm internal bore
Tube diameter fits a variety of tail rubbers and rig sleeves
Non-flash surface finish
ESP PVA Mesh Kit
20mmThis 20mm diameter PVA Mesh Kit is ideal for producing small, discreet parcels of bait and attractants and for making ultra-slim 'dynamite sticks' which are perfect for long range casting.
The bait tube has a slightly flared top to make filling easier and is moulded in a tough durable polymer.
The plunger has a rubberoid handle for comfort and is graded in 25mm divisions to help produce uniform size packages and sticks up to 15cm in length.
The bait tube is loaded with PVA Mesh knitted from an ultra-fine thread with a strong anti-ladder construction.
The unique combination of thread diameter and weave pattern produces a versatile mesh tube which is strong enough to be packed hard with bait yet fine enough to retain tiny pellets, boilie crumb and maggots.
Most importantly this ultra-fine mesh results in smaller knots and provides a controlled meltdown which is sufficient to get the bait to the bottom in deep water and yet disperse completely without residue.
The full kit of PVA Mesh, bait tube, and plunger fits neatly inside the convenient waterproof container.
Features:
20mm PVA mesh
Bait tube
Plunger
Quick melt
PVA Mesh refills available
25mmThis 25mm diameter PVA Mesh Kit is ideal for producing 'dynamite sticks' and small parcels of pellet, crushed boilies, mixers etc.
The bait tube has a slightly flared top to make filling easier and is moulded in a tough durable polymer.
The plunger has a rubberoid handle for comfort and is graded in 25mm divisions to help produce uniform size packages and sticks up to 15cm in length.
The bait tube is loaded with PVA Mesh knitted from an ultra-fine thread with a strong anti-ladder construction.
The unique combination of thread diameter and weave pattern produces a versatile mesh tube which is strong enough to be packed hard with bait yet fine enough to retain tiny pellets, boilie crumb and maggots.
Most importantly this ultra-fine mesh results in smaller knots and provides a controlled meltdown which is sufficient to get the bait to the bottom in deep water and yet disperse completely without residue.
The full kit of PVA Mesh, bait tube, and plunger fits neatly inside the convenient waterproof container.
Features:
25mm PVA mesh
Bait tube
Plunger
Quick melt
PVA Mesh refills available
32mmThis 32mm diameter PVA Mesh Kit is ideal for producing less compacted, rounded bags of bait.
It is therefore supplied with a flexible moulded funnel which fits securely in place over the top of the bait tube and can be removed for convenient storage.
The bait tube is loaded with PVA Mesh knitted from an ultra-fine thread with a strong anti-ladder construction.
The unique combination of thread diameter and weave pattern produces a versatile mesh tube which is strong enough to be packed hard with bait yet fine enough to retain tiny pellets, boilie crumb and maggots.
Most importantly this ultra-fine mesh results in smaller knots and provides a controlled meltdown which is sufficient to get the bait to the bottom in deep water and yet disperse completely without residue.
The PVA Mesh bait tube fits neatly inside the convenient waterproof container.
Features:
32mm PVA mesh
Bait tube
Funnel
Quick melt
Anti-ladder
PVA Mesh refills available
ESP Cryogen Claw Hammer Hooks
Claw-Hammers have a sweeping beaked point ideal for fishing over gravel and for assured hook holds in thick weed. Perfect when used with bottom bait combi / flipper type rigs.With longer, finer points this wide gape pattern accounted for a lot of big carp over 12 months of field testing!
Incredibly sharp straight out of the packet, ardent hook sharpeners like Gaz Fareham have been testing without reaching for the file. Together with a slick PTFE Tuflon coating and micro barbs these ensure excellent penetration.The wire gauge has been stepped up on the two largest sizes by 0.1mm and heavy forging improves strength even further.
The point length to wire diameter ratio ensures the points are still long, fine and needle sharp!
The twin process of heat and cryogenic tempering ensures formidable strength and point durability with just the right degree of shock absorbing ‘spring’ – neither too soft nor too brittle.
Enlarged eye diameters allow for thicker monofilaments to be used with the knotless knot.
Slick PTFE tuflon coating
Barbless or Micro Barbed
ESP Heat Shrink Tube
When heated the Heat Shrink Tube will reduce in size to half its original diameter, forming a tough protective sleeve which can be curved or angled.
Available in three diameters with the 1.6mm best for line aligner rigs and the 2.4mm for Ronnie rigs.
The 3.2mm can be used for sleeving lead loops and swivels.Features:
10 x 50mm lengths
Matt dark olive green
The 2.4mm is ideal for Ronnie rigs
The 1.6mm is best when tying line aligner rigs as a 'kicker'.
Forms a tough protective sleeve