Fox Black Label QR Stabiliser
The Black Label QR Stabiliser is designed to support the bankstick in loose ground making it stable and secure. Prevents bites from pulling the bankstick from the ground.
Helps secure your bankstick in place in loose ground.
This stabiliser has been designed to be added to a bankstick whilst it is already in the ground
Attaches via a clamp style brace with double click features
Click 1 allows the stabiliser to be fastened onto the bankstick and then slid down to secure into the ground.
Click 2 then locks the stabiliser into position
Eliminates the situations when the bankstick is pushed into the ground but then needs to be stabilised because the ground is too soft. At this point the bankstick usually needs to be removed from the ground and the stabiliser added for the process to be repeated
Simply click the stabiliser on when required and push into position
Compatible with all new Black Label banksticks including QR Power Point banksticks
Nash Stabiliser
Tough aluminium moulded collar and spike, securing over 16mm diameter Nash Banksticks to improve stability in both hard and soft ground and prevent twist.
Anchor pin length 7.5cm.
Features a knurled adjustment knob and tensioned spring retainer for long term reliability
Nash Siren Presentation Case
R3+/R2The tough impact proof Presentation Case keeps your valuable R3+ or R2 alarms, Receiver plus spare batteries securely encased in high density foam, protecting them from any chance of damage in transit – particularly useful when flying to carp venues, or your kit is loaded up in trailers or coaches for holiday venues - not always with the care you would take yourself!
High density foam, protecting them from any chance of damage in transit
Keeps up to 4 alarms, receiver plus spare batteries secure
Useful when flying to carp venues
R4Offering increased protection between sessions for valuable sets of R4 alarms. Pre cut recesses in the ultra high density foam hold up to 4 alarms and an R4 Receiver, with space for Night Glo and Slap Head Bobbins. Tough 600D nylon, impact resist finish and Nash metal badge trim.
High density foam, protecting them from any chance of damage in transit
Keeps up to 4 alarms, receiver plus spare batteries secure
Useful when flying to carp venues
34cm (w) x 8.5cm (h) x 24cm (d)
Matrix Super Slinky Bankstick Stabiliser
The stainless steel bankstick stabiliser is handmade to Matrix exacting standards. It matches the quality of both rock solid and super slinky banksticks.
It provides both vertical and horizontal stability to a bankstick.Product Features
Super strong
Stops the set up from twisting
Helps stabilise the whole set up
Weighs 85g
Matrix Steve Neville Buzzer Plugs (singles)
The Buzzer Plug is a black plastic plug that fits into the hole in the middle of the speaker on a Steve Neville alarm.
This has the effect of reducing the volume by about 75%. These are ideal for use during the day when full volume is not needed or at night when using a sounder box and not wanting to alert everyone else when you get a take.
The Buzzer Plugs can be put in or taken out in a matter of seconds.
Product Features
Black plastic
Reduce alarm volume by 75%
Can be put in and taken out in seconds
Matrix Snag Arm
There are two versions of these, as pictured below, the standard snag arm is compatible with pretty much every alarm on the market, not only this we have made the base plate thin enough that it enables all of our indicator mounting brackets (and most other makes) to be used with it.
We have also designed the base plate so that these can be used with the Delkim Nite lites, something that most others cannot do as they obscure the output socket.
The Deluxe Snag Arms are exactly the same design but feature a thicker base plate that we have engineered one of our Multi-Blocks in to, they come complete with the Multi-Block Roller and the thumbscrew.
They can still be used with a Nite-Lite by the addition of one of our spacers.
Both the standard and deluxe Snag Arms feature 6mm solid uprights, we have steered clear of having balls on the tops of the arms like some others, not only are they unnecessary they cause your rod to “donk” against them when the rod is removed, after repeated use it can cause damage to polished blanks.
Product Features
Strong stainless steel
6mm solid uprights
Stop the rod coming off on a take
Matrix Rock Solid Bankstick Stabiliser
These Stabilisers are designed to stop your sticks twisting in loose/soft ground, they give extra satbility for that solid set up.
The Stabilisers also feature the new CAPTIVE thumbscrew that cannot be removed from the stick, the thumsbcrews can be locked up nice and tight but for that extra security you can also use the new Torque Tool to nip them up that but tighter.Product Features
Super strong
Stops the set up from twisting
Helps stabilise the whole set up
Korda Singlez T Bar Aluminium
This revolutionary rod support system is the brain-child of Korda boss Danny Fairbrass, and was designed in line with his vision and then produced for us in stainless steel by top engineering firm, JAG Products.
It can be used in any type of ground or even on platforms, and two rod and three rod versions are available, with a whole host of different ways of setting them up, thanks to different length uprights and buzz bars, plus you can even turn it into single banksticks if you want to.
The Singlez has literally turned rod support systems upside down, as the buzz bar is at the bottom resting on the ground, thus providing far more stability and allowing it to be pushed into the ground with your feet, and the uprights are screwed into that, providing perfect spacing and ensuring they are all straight – it looks like a multi-rod, single bankstick set-up, but without all the hassle!
Each set of uprights features a spike at the bottom – there is also a Spike Extension to make it longer for use on types of bank where it needs to be pushed further into the ground - that can be pushed into almost any type of ground using your body weight on the bars, and the addition of a Spike Ball Stabiliser provides extra stability.
If you are fishing on platforms, Stage Stands are available and are sold in pairs.
Singlez are so versatile that you could even fish them as single banksticks if you wished to, with the addition of spikes screwed into the uprights.
A T-Bar is also available, which you can screw a spike onto in order to create a hole to push your Singlez set-up into – if you’d rather not stand on the Buzz Bars to do this – and that comes with a carabiner clip so that it can double up as a weigh bar for your scales, plus means it can be clipped onto your luggage when not in use so there is no chance of it being mislaid.
Key features
Rod rest system
Designed by Danny Fairbrass
Engineered by JAG Products
Top quality stainless steel
Wide range of different options
Korda Singlez Spike Extension
This revolutionary rod support system is the brain-child of Korda boss Danny Fairbrass, and was designed in line with his vision and then produced for us in stainless steel by top engineering firm, JAG Products.
It can be used in any type of ground or even on platforms, and two rod and three rod versions are available, with a whole host of different ways of setting them up, thanks to different length uprights and buzz bars, plus you can even turn it into single banksticks if you want to.
The Singlez has literally turned rod support systems upside down, as the buzz bar is at the bottom resting on the ground, thus providing far more stability and allowing it to be pushed into the ground with your feet, and the uprights are screwed into that, providing perfect spacing and ensuring they are all straight – it looks like a multi-rod, single bankstick set-up, but without all the hassle!
Each set of uprights features a spike at the bottom – there is also a Spike Extension to make it longer for use on types of bank where it needs to be pushed further into the ground - that can be pushed into almost any type of ground using your body weight on the bars, and the addition of a Spike Ball Stabiliser provides extra stability.
If you are fishing on platforms, Stage Stands are available and are sold in pairs.
Singlez are so versatile that you could even fish them as single banksticks if you wished to, with the addition of spikes screwed into the uprights.
A T-Bar is also available, which you can screw a spike onto in order to create a hole to push your Singlez set-up into – if you’d rather not stand on the Buzz Bars to do this – and that comes with a carabiner clip so that it can double up as a weigh bar for your scales, plus means it can be clipped onto your luggage when not in use so there is no chance of it being mislaid.
Key features
Rod rest system
Designed by Danny Fairbrass
Engineered by JAG Products
Top quality stainless steel
Wide range of different options
Korda Singlez Spike
This revolutionary rod support system is the brain-child of Korda boss Danny Fairbrass, and was designed in line with his vision and then produced for us in stainless steel by top engineering firm, JAG Products.
It can be used in any type of ground or even on platforms, and two rod and three rod versions are available, with a whole host of different ways of setting them up, thanks to different length uprights and buzz bars, plus you can even turn it into single banksticks if you want to.
The Singlez has literally turned rod support systems upside down, as the buzz bar is at the bottom resting on the ground, thus providing far more stability and allowing it to be pushed into the ground with your feet, and the uprights are screwed into that, providing perfect spacing and ensuring they are all straight – it looks like a multi-rod, single bankstick set-up, but without all the hassle!
Each set of uprights features a spike at the bottom – there is also a Spike Extension to make it longer for use on types of bank where it needs to be pushed further into the ground - that can be pushed into almost any type of ground using your body weight on the bars, and the addition of a Spike Ball Stabiliser provides extra stability.
If you are fishing on platforms, Stage Stands are available and are sold in pairs.
Singlez are so versatile that you could even fish them as single banksticks if you wished to, with the addition of spikes screwed into the uprights.
A T-Bar is also available, which you can screw a spike onto in order to create a hole to push your Singlez set-up into – if you’d rather not stand on the Buzz Bars to do this – and that comes with a carabiner clip so that it can double up as a weigh bar for your scales, plus means it can be clipped onto your luggage when not in use so there is no chance of it being mislaid.Key features
Rod rest system
Designed by Danny Fairbrass
Engineered by JAG Products
Top quality stainless steel
Wide range of different options
Trakker NXG Roll-up Bed Bag
The NXG Roll-Up Bed Bag is the perfect storage and transportation solution for your standard or compact-sized bed/bedchair complete with sleeping bag attached.
Featuring heavy-duty 10mm zips, EVA carry-handles and a padded, removable shoulder strap, the NXG Roll-Up Bed Bag perfectly complements the other items in our award-winning NXG luggage range.
Roll up storage bag for compact and standard beds
Roll down opening/closure ensures maximum use of space
Heavy-duty 10mm zips allow easy access to the bed and sleeping bag
Padded removable shoulder strap
EVA Carry handles allow for easy lifting
Sized to take standard or compact beds with sleeping bag attached
Technical Specification:Materials: 600D PolyesterDimensions: (L) 109cm x (W) 30cm x (H) 80cm
