Trakker Butt Grabber
Securely grip your rods through the most savage of takes
Minimalist design
Two sizes cater for abbreviated (small) and full duplon/cork handles (large)
TECHNICAL SPECIFICATION:
Dimensions: 2.5 (H) cm (not including thread)
Weight: Approx 4g
Material: Plastic
Trakker Easylift Weigh Bar
The Easylift Weigh Bar enables 2-handed hoisting of the scales for steady and accurate readings of all-important fish weights.
While it’s sturdy, the Weigh Bar is very light when carrying in a rucksack. Features Duplon grips for a positive grip.
PRODUCT FEATURES:
Enables 2-handed hoisting of the scales for steady and accurate readings
Lightweight and compact for transportation
Duplon handles for secure grip when hands are wet
TECHNICAL SPECIFICATION:
Dimensions: 29 (L) x 4.5 (W) cm
Weight: Approx 173g
Material: Aluminium
Trakker Tempest Brolly Insect Panel
100Specifically designed for the Tempest Brolly 100 to keep those annoying and sometimes biting bugs and insects out of your shelter when fishing with the door and sides rolled back, the Tempest Brolly 100 Insect Panel simply zips into the inside of the front of the shelter to give you an unrestricted view from the bivvy.
It features tiebacks for the door and side panels and is supplied in a 210D carry-bag with T-pegs.Product Features.
Zip-in Insect Panel for Tempest Brolly 100
Tie-backs for door and side panels
Supplied with carrybag and T-pegs
Technical Specifications.Material: B12 MeshWeight: Approx 0.55kgTransport size: 45 x 22cm
100TDesigned specifically for the Tempest Brolly 100T, this simple yet effective insect panel offers protection from those annoying bugs and insects while offering an unrestricted view.
It features tiebacks for the door and side panels, and a twin-zip opening.
Zip in insect panel specifically designed for Tempest Brolly 100T
Tie backs for door and side panels
Supplied with carry bag and T pegs
Compatible with 202270 Tempest Brolly 100T
TECHNICAL SPECIFICATIONMaterial: Polyester meshWeight: Approx 0.5kgTransport size: 40 x 25cm
Trakker Tempest Bivvy Skull Cap Wrap Aquatexx EV 1.0
100Transform your Tempest 100 Bivvy Aquatexx EV® into a twin-skin shelter with the Skull Cap Wrap, which works to reduce condensation and offer extra protection from the elements by creating a peak.
Its extended sides and rear provide full top-to-bottom twin-skin coverage.
The Tempest 100 Bivvy Skull Cap Wrap Aquatexx EV can be easily fitted in seconds.
It uses a spigot system on the three front poles and is then simply pegged down around the bivvy.
The back vents allow air flow through the shelter in warmer weather, and the Skull Cap Wrap will also keep things cooler in the bivvy.
It features dual rod straps for convenient, safe placement of rods and rain gutter.
The 2021 Tempest Aquatexx EV range of shelters and their accessories feature Aquatexx EV material to represent the best in breathable shelter material technology, and a hydrostatic head of 25,000 far surpasses anything else on the market. PRODUCT FEATURES:
Specifically designed for the Tempest 100 Bivvy Aquatexx EV 1.0
Creates a peak to offer additional protection from the elements
Reduces condensation and increases shade
Rain gutter
Quick and easy to fit
Dual rod straps
Adaptive Ventilation Technology – keeps air circulating to reduce condensation
Aquatexx EV fabric – super-waterproof, breathable and hydrophobic
Supplied in an Aquatexx EV™ zipped carrybag
Compatible with 201520 Tempest 100 Bivvy Aquatexx EV
TECHNICAL SPECIFICATIONMaterial: Aquatexx EV™Weight: Approx 4kgTransport size: 60 x 35cm
150Transform your Tempest 150 Bivvy Aquatexx EV into a twin-skin shelter with the Skull Cap Wrap, which works to reduce condensation and offer extra protection from the elements by creating a peak.
Its extended sides and rear provide full top-to-bottom twin-skin coverage.
The Tempest 150 Bivvy Skull Cap Wrap Aquatexx EV® can be easily fitted in seconds.
It uses a spigot system on the three front poles and is then simply pegged down around the bivvy.
The back vents allow air flow through the shelter in warmer weather, and the Skull Cap Wrap will also keep things cooler in the bivvy.
It features dual rod straps for convenient and safe placement of rods and rain gutter.
The 2021 Tempest Aquatexx EV range of shelters and accessories feature Aquatexx EV material to represent the best in breathable shelter material technology, and a hydrostatic head of 25,000 far surpasses anything else on the market.PRODUCT FEATURES:
Specifically designed for the Tempest 150 Bivvy Aquatexx EV 1.0
Creates a peak offering additional protection from the elements
Reduces condensation and increases shade
Rain gutter
Quick and easy to fit
Dual rod straps
Adaptive Ventilation Technology - keeps air circulating, reducing condensation
Aquatexx EV fabric - super waterproof, breathable and hydrophobic
Supplied in an Aquatexx EV™ zipped carry bag
Compatible with 201529 Tempest 150 Bivvy Aquatexx EV 1.0
TECHNICAL SPECIFICATION Material: Aquatexx EVWeight: Approx 4.8kgTransport size: 68 x 40cm
Trakker SLX V3 Bivvy Extended Wrap
SLX 100 WrapTransform the SLX V3 into a triple skin shelter to offer the ultimate in warmth and comfort during the colder months, further reducing condensation and increasing heat retention.
Manufactured from our upgraded 10,000mm Hydrostatic Head Polyester, the SLX V3 Bivvy Wrap creates a small porch area at the front of your bivvy to allow for greater space inside the bivvy, it also features a zipped rear vent for increased ventilation and dual-zipped doors which allow you to create a letterbox opening.Product Features.
Transformes SLX V3 in to a triple skin shelter for ultimate warmth and comfort
Reduces condensation and increases heat retention
Zipped rear vent for increased ventilation
Creates a small porch area in front of bivvy
Dual-zipped doors allowing you to create a letterbox opening
Tie-backs for door and side panels
Dual rod straps
Supplied with carrybag and T-pegs
Upgraded 10,000mm Hydrostatic Head fabric
Technical Specifications.Material: polyesterWeight: Approx 3.55kg (plus pegs weighing 0.9kg)Dimensions: Approx 130H x 265D x 300W cmTransport size: 50 x 32cmSLX 150 WrapTransform the SLX V3 into a triple skin shelter to offer the ultimate in warmth and comfort during the colder months, further reducing condensation and increasing heat retention.
Manufactured from our upgraded 10,000mm Hydrostatic Head Polyester, the SLX V3 Bivvy Wrap creates a small porch area at the front of your bivvy to allow for greater space inside the bivvy, it also features a zipped rear vent for increased ventilation and dual-zipped doors which allow you to create a letterbox opening.Product Features.
Transformes SLX V3 in to a triple skin shelter for ultimate warmth and comfort
Reduces condensation and increases heat retention
Zipped rear vent for increased ventilation
Creates a small porch area in front of bivvy
Dual-zipped doors allowing you to create a letterbox opening
Tie-backs for door and side panels
Dual rod straps
Supplied with carrybag and T-pegs
Upgraded 10,000mm Hydrostatic Head fabric
Technical Specifications.Material: polyesterWeight: Approx 3.8kg (plus pegs weighing 0.9kg)Dimensions: Approx 150H x 305D x 320W cmTransport size: 55 x 35cm
Trakker NXG Rod Sleeve
NXG 10 foot Rod SleeveWith 10ft rods being highly popular for anglers who fish from boats or even those who just enjoy stalking, the Trakker NXG 10ft Rod Sleeve features a ¾ length zip to allow rods to be easily secured inside and protected during transit to and from the lake.
Manufactured from 600-denier polyester and finished in a subtle shade of olive green, not only does it look great, but is also hard wearing and highly protective too.
Product Features
Single padded Rod Sleeve to accommodate a fully made up 10ft rod
Duplon carry handles
3/4 length zip
Technical SpecificationMaterial: 600-dennier polyesterDimensions: L160cm
NXG 12 foot Rod Sleeve
Designed to take fully made up singular 12ft rods, the NXG Rod Sleeves will comfortably house rods with 50mm butt rings and large, big pit reels attached.
The padded sleeve has been manufactured from 600-denier polyester in olive green with D-clips to allow you to attach a padded shoulder strap.
Product Features:
Single padded sleeve to accommodate a made-up rod
10mm heavy-duty zip with double zip pullers
Internal padding to protect the rod/reel in transit
Technical Specification:
Dimensions: 12ft – 200cm
Material: 600D Polyester
Trakker Tempest 200 Shelter
The biggest Tempest to date! The Tempest 200 offers two-bed capacity with optimum storage space for the long-session specialists, where additional space for comfort is required, and due to the patented quick-erect design that the entire Tempest range follows, is ideal for any length of session.
Not only is the Tempest spacious enough for two beds, it also has a height of 170cm for the taller anglers, and can be fitted with an inner capsule to maximize comfort year-round.
Revolutionary patented design
Ultra-Strong, easy to use and ultra-quick to assemble
Machined Aluminium block – Super strong and fatigue resistant
200 size designed for two beds and two anglers with optimum storage
Twin vents at the rear
Dual rod straps
Anti-twist pole system
Supplied with tension strap, carry bag and T pegs
Compatible with 201548 Skull Cap (available separately)
TECHNICAL SPECIFICATION Material: 210D Fabric – waterproof and durable Weight: Approx 13.5kg (plus pegs and groundsheet weighing 4.5kg)Dimensions: Approx 170H x 310D x 170W cmTransport size: 165 x 35cm
Trakker Tempest 200 Skull Cap
The Trakker Tempest 200 Skull Cap creates a peak to the front of the Tempest 200, which gives greater protection from the rain without compromising the view of the lake.
Not only will the Skull Cap give additional protection from the weather, it also adds a second skin to the top of the shelter to combat condensation and retain heat, and unlike a full overwrap, it can be left in place when the bivvy is packed down.
Specifically designed for the Tempest 200
Designed to give the Tempest 200 a peak
Reduces condensation, increases shade
Can be left in place during set-up and pack-down
Clips are easy to fit and can be left in place
Rain gutter
Dual rod straps
Draw string carry bag
Compatible with 201547 Tempest 200 (available separately)
TECHNICAL SPECIFICATIONMaterial: 210DWeight: Approx 1.4kgTransport size: Approx 45 x 18 x 18cm
Trakker RLX Nano Chair
The RLX Nano Chair combines all of the benefits of a lightweight compact chair with the ability to be used as a bedchair seat.
Its clever design makes it perfect for use on flat and sloping banks alike due to its adjustable front legs which have mud feet to prevent sinking in soft ground.
It has a strong and lightweight aluminium frame and weighs approximately 2.7kg.
Product Features
Incredibly light and compact chair/bedchair seat
Fits easily on a barrow or under a bedchair
Clever design makes it perfect for flat or sloping banks
Strong and lightweight aluminium frame
Adjustable front legs with mud feet
Fleece upper for comfort
Technical SpecificationDimensions: H57cm x W47cm (open); L72cm x W47cm (closed);
Weight: Approx. 2.7kg
Trakker NXG Single Lead Pouch
The NXG Lead Pouch Single Compartment keeps your leads safely stored away and organised, it has a soft-feel inner which keeps the lead’s coatings in perfect condition.
There is a dual zipped lid to keep them securely stored inside and is ideal for those who prefer to take a minimalist approach where a smaller number of leads is preferred.
It has been manufactured from 600-denier polyester in a subtle olive green and has a webbing carry handle for easy transportation.
Product Features
Lead storage pouch
Single zipped compartment
Soft-feel inner lining
Carry handle
Technical SpecificationMaterial: 600-denier polyesterDimensions: L14cm x W8.5cm x D8cm
Trakker NXG Essential Bag
The NXG Essentials Bag is the ideal solution for anglers wanting to keep their personal belongings such as phone, wallet and keys, safely to-hand whether that be during your session, or even when you’re just nipping up the pond to bait-up or see your mate for a brew!
The NXG Essentials Bag features zipped access to the main internal compartment, which reveals another zipped pocket within, which is ideal for smaller items such as coins or keys.
There’s also a handy pocket on the front of the bag, and an adjustable shoulder strap, which can be removed if required.
Ideal for personal belonging
Zipped main access
Internal zipped pocket
Adjustable cross-body shoulder strap
Materials: 600D polyester
Dimensions: (L)21cm x (W)15cm x (D)6cm
