Korda Ring Klips
The Ring Klip has been specially designed for the easy attachment of hook links. The unique design allows greater movement thanks to the ring section of the clip.
It can be easily attached to a swivel and used with a lead clip, or fished between two beads on a helicopter-style set-up.
They come in packs of 20.Key features
Quick and easy attachment of hook links
Ring gives extra movement
Non reflective coating
Korda Chodsafe
The ChodSafe is the perfect storage system for any angler who uses chod rigs and allows them to be kept in perfect condition until you need them.
It is built from rugged plastic and finished in soft-touch rubber, with a flip-open lid that is held closed by magnets when not being used, to prevent any chance of spillages.
Inside there are two different foam-covered cylindrical, removable, sections for storing your chods, with the differing diameter of them allowing you to keep the perfect curve to both your short and long rigs.
Hooks are held in place via a machined, grooved, aluminium bar, which also avoids any chance of damage to the points during transit, and the other end of the rig is secured to the foam via a pin – 30 pins are supplied with each ChodSafe.
As well as being able to hold 28 pre-tied chod rigs, there is also space for three leadcore leaders complete with Heli-Safe Systems.
When the cylinder is lifter out of the case, you can pop out a recess handle, which has been designed to help you to steam the perfect curve into your rigs without burning your fingers.
Key features
Cylindrical foam design to store the perfect shape chods
Machined, grooved aluminium hook retaining bar
Additional space for leaders
Pull out handle to allow steaming of the perfect shaped curve
Magnetic fasteners
Korda Spod & Marker Braid
Marker Braid Marker Braid is very low diameter and is designed to allow you to cast a marker float, and explore the lake bed, at ranges as far as you can cash with your actual fishing rods.
It has zero stretch and so transmits the feel of the lake bed back to your marker rod, and as it is a floating braid, once you do find a spot that helps to ensure that your marker float will pop up when you require it to.
It is dark green in colour which helps to make it as unobtrusive as possible when you are feature finding – either with a marker float or leading around.
Marker Braid is hard-wearing, which is essential considering how often you cast a marker float and drag it back through weed etc, and it also knots very well.
As it is so thin and only 20lb breaking strain, you will need to use a 30lb Arma-Kord shockleader to prevent crack-offs.
Each spool contains 300m of braid.
Key features Perfect for feature findingLow diameter and zero stretchFloating braidDark green colourSpod Braid Spod Braid is a braided main line for your spod rod and is designed to make baiting up as effortless as possible, even when fishing at long range.
This 20lb breaking strain braid has an incredibly low diameter, at just 0.16mm, so will allow a spod or Spomb to be cast as far as you are able to go with your fishing rods, and at shorter ranges allows you to do it with the minimum amount of effort as it casts so well.
Spod Braid is also very hard wearing, which is essential given how often it will be cast, and has good knot strength, but it does need to be used with a 30lb Arma-Kord shockleader to prevent crack-offs on the cast – keeping it damp whilst in use will also help to prevent frap-ups around your rod rings.
It is a hi-viz fluoro green colour, which not only makes sure that you can easily see where the line is when winding in, but also helps to scare birdlife (including seagulls) away from your swim as the braid travels through the air – especially useful when spodding our floaters.
Each spool contains 300m of Spod Braid, so unless you are spodding at long range, you could even fill two reels from it, as long as you use backing on your spools.
Key features
Designed for spodding
Extremely low diameter
Hi-viz fluoro green colour
Korda Singlez Uprights
This revolutionary rod support system is the brain-child of Korda boss Danny Fairbrass, and was designed in line with his vision and then produced for us in stainless steel by top engineering firm, JAG Products.
It can be used in any type of ground or even on platforms, and two rod and three rod versions are available, with a whole host of different ways of setting them up, thanks to different length uprights and buzz bars, plus you can even turn it into single banksticks if you want to.
The Singlez has literally turned rod support systems upside down, as the buzz bar is at the bottom resting on the ground, thus providing far more stability and allowing it to be pushed into the ground with your feet, and the uprights are screwed into that, providing perfect spacing and ensuring they are all straight – it looks like a multi-rod, single bankstick set-up, but without all the hassle!
Each set of uprights features a spike at the bottom – there is also a Spike Extension to make it longer for use on types of bank where it needs to be pushed further into the ground - that can be pushed into almost any type of ground using your body weight on the bars, and the addition of a Spike Ball Stabiliser provides extra stability.
If you are fishing on platforms, Stage Stands are available and are sold in pairs.
Singlez are so versatile that you could even fish them as single banksticks if you wished to, with the addition of spikes screwed into the uprights.
A T-Bar is also available, which you can screw a spike onto in order to create a hole to push your Singlez set-up into – if you’d rather not stand on the Buzz Bars to do this – and that comes with a carabiner clip so that it can double up as a weigh bar for your scales, plus means it can be clipped onto your luggage when not in use so there is no chance of it being mislaid.
Key features
Rod rest system
Designed by Danny Fairbrass
Engineered by JAG Products
Top quality stainless steel
Wide range of different options
Korda Kore Thermal Leggins
One of the most over-looked aspects of keeping warm in the winter is the use of base layers – which those engaging in many winter pursuits wouldn’t dream of foregoing.
These Kore Thermal Leggings probably won’t impress your mates, but they will keep you warm and are very comfortable to wear.
They are made from a quick-dry, brushed back material, which is designed to regulate your body heat and help to keep you warm, and in addition to these thermal properties, are also breathable and will wick moisture away from your skin.
They are the perfect choice when worn underneath something like our Polar Kombat trousers.Key features
Base layer
Quick-dry brushed back material
Regulates body heat
Breathable and moisture wicking
Korda Compac Carryall Dark Kamo
The range of Dark Kamo Compac Carryalls have been designed to cover every situation from short sessions and stalking, right the way through to those who like to take everything, including the kitchen sink, fishing with them. The Carryalls have been designed to be perfectly compatible with our range of Compac EVA pouches, with the external pockets designed to hold specific models of those, depending on which size of carryall you go for.
The modular pockets on the Small and Medium versions will hold either a Compac 110, or two Compac 100s. On the Large or X-Large models, these pockets will perfectly fit a Compac 140, two Compac 110s, or a combination of a Compac 110 and a Compac 100.
Whichever size you go for, this is more than just a carryall to chuck all your gear in to transport it, as once on the bank the durable and water-resistant fabric, plus a reinforced waterproof base, will ensure everything inside stays dry.
Each carryall also has a rigid lid which doubles up as a bivvy table and saves you having to take a separate one. Each size features five external pockets, along with an internal zipped storage pocket on the underside of the lid to give you quick access to any essentials, so you however much kit you are carrying, you can organise it in a way where you can quickly find what you need.
Key features
Durable and water-resistant fabric
Reinforced waterproof base
Firm lid can be used as a bivvy table
Five external pockets
Internal zipped storage pocket on underside of the lid
Removable padded shoulder strap
Reinforced carry handles
Heavy-duty zips
Wipe-clean lining
Small Carryall: Overall dimensions: 48cm x 33cm x 27 cm. Main compartment dimensions: 32cm x 24cm x 27 cm / 20 litres
Medium Carryall: Overall dimensions: 53cm x 40cm x 27cm. Main compartment dimensions: 35cm x 29cm x 27cm / 28 litres
Large Carryall: Overall dimensions: 53cm x 35cm x 33cm. Main compartment dimensions: 38cm x 23cm x 33cm / 30 litres
Korda Spring Bow Net 6ft 42"
Like rods, landing nets can be a very personal choice.
Aesthetics, function and price always influencing most anglers’ decision making when purchasing a new item of tackle.
We took our inspiration from a classic design from the past.
Available in the early eighties by a shop in North London, Dons of Edmonton.
Their Springbow was a brown fibre glass net, featuring a very unique, heavy stainless spreader tube, but that said it was the net of the era and the only serious choice for the carp fisher of the day!
The fashion of today seems to be for very thin handles similar to or matching an angler’s carp rods.
We have gone completely against this trend.
For performance it was incredibly important that both the arms and pole had inherent stiffness.
By having a very low diameter pole, you increase weight because you must increase wall thickness, thin handles are simply not as good to hold in use.
A higher diameter handle increases stiffness, is easier to use and more comfortable to grip.
We can utilise a thinner wall section without having to compromise on strength or weight.
Our design has a 6’ handle that tapers down from 23 to 18mm.
Manufactured from ultra-light, high performing carbon fibre in a stunning satin black finish.
With a beautifully turned 316 stainless steel point in the end.
This has helped to create a net that is so light, that when fully assembled and in use, lays perfectly on the surface of the water without having to use any kind of net float.
One of the key design points was to make a ‘statement’ spreader block.
Something extremely light, very strong and unique in appearance.
From concept to production, we updated the design four times over a period of about two and a half years.
The final version is stunning to look at. Engineered by our friends at JAG, it’s incredibly light, but more importantly so very easy to use and assemble the arms into.
As you offer the arms up to the block, you’ll notice inside it has a slight oval shape to it, we have machined the block so that it has what we call a “leading” edge.
This makes additional space for the arm as its flexed and pushed into place.
The arms exit the block at the perfect angle of 91 degrees, this along with using the stiffest arms we could make without compromising assembly give a truly lovely shape to each assembled net.
Each arm has an oversized machined, anodised aluminium, rounded end, designed so that it won’t push through the mesh and damage it.
This part holds the thick green cord between the arms, with zero stretch and a perfect curve in the arms this keeps everything as tight as possible and helps reduce drag as it’s pushed through the water.
The aluminium spreader block is machined out on both front and back faces, (you can see the arms sitting inside).
This feature further reducing weight and giving its “chassis like styling”.
We’ve added a small slot on the front face that fits a 15mm isotope (NOT included) and engraved on the back with the Spring Bow logo.
The final touch was to spray the block in a hard wearing, ceramic, Gun Smoke finish.
Each net comes with a medium depth net in full Hexmesh.
The net part is deep enough for the angler that chooses to push the handle into the lakebed with the arms far enough above the water to retain and stop any carp jumping free after capture!
All nets come in a heavy-duty Korda Dark Kamo sleeve which has separate pockets for both handle and the arms.
Super Light
Super Stiff
6’ Reverse Taper Satin Black Handle
316 Stainless Steel Spike Cap
Unique Aluminium JAG Engineered Spreader Block
15mm Isotope Slot (Isotope NOT Included)
Machined anodised aluminium, oversized rounded arm ends
Heavy zero stretch cord
Floats without any add on foam floats
Hexmesh mid depth mesh
Each net comes heavy duty Korda Dark Kamo two pocket sleeve
Korda Zig Box
If you want to keep your zig hook links in perfect condition until you need to use them, then look no further than the Zig Box.
It has been designed to allow you to store even the longest of zigs on EVA foam spools so that there is no danger of them getting tangled, or there being damage to the hook link material or hook point. It also comes in very handy for storing pre-tied leaders.
The hard, high impact plastic box has a tinted lid which closes securely in place via a clip-lock fastener, and has a lip all the way around the inside to help prevent water getting into it.
It comes supplied with four 45mm diameter EVA spools, plus 20 pins for securing your zigs or leaders on them.
It can also be used in conjunction with our Ready Zig spools, if you prefer to buy ready-tied zigs.Key features
Designed for storing zigs
EVA foam spools
Can also be used for pre-tied leaders
Clip-lock fastener
High impact plastic
Korda Stow Bar
The Stow Bars are designed for when snag fishing with locked up clutches, or in other situations where you have a tight drag and your rod tip isn’t pointing at your rig, as it will stop your rod getting dragged off of your bite alarm.
The Stow Bars are incredibly strong and are made from lightweight aluminium – in a choice of silver or black versions – and feature a bracket which fits under your bite alarm and can be left in place even when the bars aren’t being used.
The Stow Bars are easily fitted to this bracket via a screw thread and the gap between them can be adjusted to suit the diameter of your rod blank.
As well as being used as a pair, a single bar can also be used if that suits the angling situation better.
The bars have a very smooth, rounded finish, so there is no way that your line can get caught on them as you lift the rod up.
Each pack contains one set of Stow Bars.Key features
Ideal for snag fishing
Prevents your rod getting dragged off of the buzzer
Strong and adjustable
Black or silver versions
Korda Durakord 45lb
This incredibly strong and tough leader material has been specifically designed for use in the most demanding of situations, where snags are a problem.
It is made from a blend of Dyneema and polyester to produce a leader material which can easily be spliced, and which will also absorb water to ensure that it sinks very well.
In addition to being incredibly tough and reducing the chances of being cut-off, it has also been designed so that it is thick for its breaking strain, with the idea being that this will help to prevent it from cutting into submerged trees and stumps – or any type of underwater woodwork – and instead it will rub across it and give you a greater chance of landing a fish in this situation.Key features
Heavy duty snag leader
Incredibly strong and abrasion resistant
Absorbs water and sinks very well
Can easily be spliced
Fish safety should be paramount in every aspect of carp-fishing and these inserts have been designed to ensure a safe setup when using Korda inline leads. If your line parts whilst using the Inline Safety Sleeves, the lead can easily slide off the sleeve and over any shockleader knot you may be incorporating.
The sleeve loosely sits inside the lead and only locks into place when the Korda size 8 swivel is inserted. Following any breakages, when pressure is applied to the lead it will release the swivel and the lead will easily fall free.
This version has been specifically designed to be used with Nano Tubing and Leadcore. Nano Tubing is more slimline than standard tubing, so not all tubing will be compatible. The sleeves have a streamlined design and a slimline inner core to ensure a tight fit, which eliminates the need for a tail rubber and again greatly improving the fish safety aspect.
The Inline Safety Sleeves have been specifically engineered for inline lead systems. At its core, this design prioritises the well-being of our carp, while maintaining optimal fishing efficiency.
Available in three sizes (small, medium and large), these Inline Safety Sleeves seamlessly integrate with our complete inline lead range, accommodating weights from 1.1oz to 8oz. Each sleeve provides a snug, secure fit while maintaining its quick-release capabilities under pressure.
Key features
Fits all inline leads
Compatible with Nano Tubing or Leadcore
Insert fits all size 8 Korda swivels
Streamlined design
Perfect for using with Solid Bags
Available in 3 lengths
Naked-line version also available
Fish safety should be paramount in every aspect of carp-fishing and these inserts have been designed to ensure a safe setup when using Korda inline leads. If your line parts whilst using the Inline Safety Sleeves, the lead can easily slide off the sleeve and over any shockleader knot you may be incorporating.
The sleeve loosely sits inside the lead and only locks into place when the Korda size 8 swivel is inserted. Following any breakages, when pressure is applied to the lead it will release the swivel and the lead will easily fall free.
This Naked version has been specifically designed to be used without any tubing or leadcore. They have a streamlined design and a fine inner core to ensure a tight fit on monofilament lines, removing the need for a tail rubber and again greatly improving the fish safety aspect.
The Inline Safety Sleeves have been specifically engineered for inline lead systems. At its core, this design prioritises the well-being of our carp, while maintaining optimal fishing efficiency.
Available in three sizes (small, medium and large), these Inline Safety Sleeves seamlessly integrate with our complete inline lead range, accommodating weights from 1.1oz to 8oz. Each sleeve provides a snug, secure fit while maintaining its quick-release capabilities under pressure.
Key features
Fits all Korda inline leads
Suitable for fishing without leader or tubing
Insert fits all size 8 Korda swivels
Streamlined design
Perfect for using with Solid Bags
Available in 3 lengths
Tubing and Leadcore version also available
