Light up Dumpy Bobbins.
Feature an LED inside the body to illuminate when you get an indication.
When used with Fox Micron alarms that feature night lights, they will glow faintly when the night light function is turned on.
Injection moulded opaque coloured main body.
Black adjustable ball clips.
Unique indented cap is removable allowing you to perfectly align the line clip and Fox logos.
Weighs 10g and comes supplied with removable 14g weight.
Available in Red, Orange, Green, Blue, Purple, White and Black.
6ins black braided wire connection with bayonet connection to the hockey stick.
Connection to alarm is made through a 2.5mm Jack plug attached to the hockey stick, it is compatible with most alarms featuring 2.5mm socket.
Fox Mini Micron X & Receiver Set
A modern re-worked version of the old school classic Mini Micron Bite Alarm boasting a number of great new features including receiver technology, volume control button with seven levels.
Tone control button with four settings
Sensitivity control button with four different settings
Drop back differential
Compatible with Mini Micron X Receiver
Two 5mm High Vis Multi coloured LED’s, Green, Blue, Red and Orange
Colour selected by holding down volume button and pressing sensitivity button to change
Adjustable LED brightness
LED’s adjusted by holding down volume button and pressing tone button
D-Tec Sensing System/Roller wheel technology for clear, consistent bite detection
Power out socket 2.5mm – for use with illuminated bite indicators such as the Fox Illuminated Swinger
Low battery warning
Batteries are too low when the LEDs automatically begin to flash red every 2 seconds
Cone speaker for crisp sound
Rubber inlays to protect your rod and hold it in place on savage bites
On/off toggle switch
Knurled locking collar
Takes small N Type/ LR1 batteries
Metal (Alloy) 3/8 BSF thread
Top tip: For the best bite indication always use in conjunction with a Bobbin, Hanger or Swinger
Available in 2,3,4 rod sets with receiver
Fox Rod Lok
New take on a classic Fox product. Steel skeletal frame over moulded in plastic and soft touch rubber. Designed to tightly grip the butt of the rod.
New take on a classic Fox product
Steel skeletal frame over moulded in plastic and soft touch rubber
Designed to tightly grip the butt of the rod
Medium suited to abbreviated handles, Large ideal for Slim Cork and Slim Duplon handles
Fox Black Label Snag Ears
Aside from looking the part these Snag Ears also have a very practical use in that they prevent your rod from coming off of your bite alarm when fishing ‘locked up’. They have been designed to work with most bite alarms (especially our N and M series of Microns!) and have a rubber over mould on the top half to protect the blank of your rod when it comes into contact with it.
Hockey stick built into snag ear plate for easy alarm and indicator alignment
Designed for Black Label indicators to be screwed onto
Ears can be unscrewed to protect them in transit or when they are not needed
Rubber over moulds on the top half are designed to offer protection to your rod
Designed to work with most bite alarms, especially our N and M series of Microns!
Packaging made from 100% recycled cardboard
Fox Micron RX+ Presentation Sets
Weatherproof sealed case
Digital circuitry
D-Tec Plus Sensing System (DTSS)
Drop back differential
Low battery drain
CNC machined Tru-Run roller wheel
Twin multi-colour LEDs (Red, Green, Blue, Orange, Purple & White)
On / Off toggle switch with 2 operational modes (day and night mode)
When in night mode both LEDs will subtly glow in your chosen colour
High quality cone speaker
Rigid 3/8” stainless steel thread
Rod-friendly rubber inlays
Indexed ergonomic control for volume (8 different levels of volume with lowest setting being completely silent)
Indexed ergonomic control for tone (8 different tone settings: turn dial clockwise to raise pitch and anti-clockwise to lower pitch)
Indexed ergonomic control for Intelligent Sensitivity featuring See-Saw elimination (8 different sensitivity settings – see below Sensitivity table for comparison to NTX-R)
Range test function allows user to check RX+ Receiver is picking up RX+ head at any given range
Low battery warning (LED colour changes to cyan indicating it is time to replace batteries)
Power Out Socket (2.5mm) for use with illuminated Swingers
Supplied with two compression washer options: rigid and soft with an additional spare soft washer per unit
Requires 2 x AA batteries
RX+ Receiver, 2-rod, 3-rod and 4-rod presentation sets available separately
Improved features compared to NTX-R
Deeper ears with no increase in the height of the alarm
Twin multi-colour LEDs, one per ear and at the very top of the ear
External control of the multi-colour LEDs with Colour Sync™ function – simply change LED colour via button on the battery cover
Manually selectable day and night modes
External control of the Vari-Bright adjustable LED brightness to suit the conditions you are fishing in (choice of 3 LED brightness settings in day mode and 3 different brightness settings in night mode) simply adjust via button on battery cover
Larger clearance around the roller wheel and improved drainage vastly reduces chances of roller wheel freezing up in extreme cold conditions
Stronger range performance with RX+ Receiver
Improved sensitivity range (see below)
Sensitivity ControlIn all sensitivity settings (except maximum), the line must travel the specified distance in the same direction and within 2 seconds in order to trigger the unit. Any movement in the opposite direction will reset the distance counter to zero. This can substantially reduce, or eliminate false triggering caused by wind and water movement. Line Movement RX+ Line Movement NTX-RSetting 1 (Min) 90mm 74mmSetting 2 73mm 56mmSetting 3 56mm 48mmSetting 4 34mm 40mmSetting 5 17mm 32mmSetting 6 11mm 24mmSetting 7 5.6mm 16mmSetting 8 (Max) 2.8mm 8mm
Matrix Hot Head Isotopes
Premium, ultra-bright, long-life isotopes custom built to fit our indicator heads (and many others). Essential for any night angler.
Product Features
Ultra-bright
Long-life
Perfect for fishing at night
Might fit other indicator heads
These are 23mm long and 3mm diameter
Matrix Dinky Hot Head Isotope
Premium, ultra-bright, long-life isotopes custom built to fit our indicator heads (and many others).
Essential for any night angler.
Product Features
Ultra-bright
Long-life
Perfect for fishing at night
Might fit other indicator heads
These are 15mm long and 3mm diameter
Nash Siren R3+ Presentation SetThe R3+ offers the same iconic and instantly recognisable style as the groundbreaking R3 alarms, but now with even more advanced features.
Push button variable LED function allows indicator and alarm set ups to be customised and changed instantly, with the innovative Nash LED output and MMCX connection illuminating the wicked Siren Night Glo Bobbins and Swing Arms for ultimate visual indication.
Combined with the critically acclaimed Siren Speed Sensing that screens out false indications from wind, undertow and drifting weed it’s a complete package that combines performance and practicality.
R3+ Receivers accurately reproduce indications from R3+ Alarm heads, tested to in excess of 400 metres to ensure their reliability when challenging terrain and atmospherics cripple the performance of inferior remote systems.
R3+ Alarm
Push button variable LED colour - Red, Blue, Green, White and Purple
Pulsing LED output via MMCX connection
Compatible with Siren Night Glo Bobbins and Swing Arm illuminated indicators
Supplied with an MMCX converter for direct connection of Nash Bobbins and Slap Heads
Two Speed Sensing settings to screen out false indications from wind, drift and drag
Roller Wheel Sensing option where slow takes are expected â such as winter zigging
5 variable tone settings
4 volume settings
One touch mute
Removeable rubberised snag ears
Powered by 1 x CR2 battery (not included)
R3+ Receiver
Exact tone replication from each paired R3+ Alarm
LED colour replication from each paired R3+ Alarm
4 channels for pairing with single R3+ Alarms
Fifth buddy channel pairs with up to 32 other R3+ alarms
Volume adjustment, mute and vibration function
Last event recall
Powered by 1 x CR123A battery (not included)
Preston Butt Gripper Rest
The Butt Gripper rest is extremely versatile and can be used in conjunction with a wide range of rod butt diameters.
The soft grippy TPE ribs will help to grip the butt, while still allowing you to remove the rod smoothly when a fish is hookedor a recast is required.
Matrix Black Chain
Stainless steel black chain with standard plastic screw thread to attach to your hockey stick and bobbin.
Product Features
Stainless steel chain
Wont rust over time
Standard thread
Korda Stow Bar
The Stow Bars are designed for when snag fishing with locked up clutches, or in other situations where you have a tight drag and your rod tip isn’t pointing at your rig, as it will stop your rod getting dragged off of your bite alarm.
The Stow Bars are incredibly strong and are made from lightweight aluminium – in a choice of silver or black versions – and feature a bracket which fits under your bite alarm and can be left in place even when the bars aren’t being used.
The Stow Bars are easily fitted to this bracket via a screw thread and the gap between them can be adjusted to suit the diameter of your rod blank.
As well as being used as a pair, a single bar can also be used if that suits the angling situation better.
The bars have a very smooth, rounded finish, so there is no way that your line can get caught on them as you lift the rod up.
Each pack contains one set of Stow Bars.Key features
Ideal for snag fishing
Prevents your rod getting dragged off of the buzzer
Strong and adjustable
Black or silver versions
