Preston ICS In-Line Solid Pellet Feeders
The ICS In-Line Solid Pellet Feeders are available in two body sizes and are perfect for use with micro and softened 4mm pellets.
The solid body helps to keep the bait in the feeder until it is on the bottom of the lake making it perfect for any depth of water, while the holes at the back allow water to slowly help the pellets release once in position.
The Inter Change System (ICS) allows you to quickly and easily change feeder throughout your session, simply slide the tail rubber off the stem, slide the feeder up on to the line, remove via the groove on the feeder and then replace with an alternative ICS product
Avid Carp Tail Rubbers
Compatible with all Avid Lead Clips. Designed to provide streamlined end tackle, with supersoftness for maximum safety.
Compatible with all Avid Lead Clips
Streamlined
Maximum safety
Avid Carp Inline Tail Rubbers
Designed for use with all Avid Inline leads. Can also be used with Avid Lead Clips fora slower-releasing setup or when fishing incolder conditions.
For use with all avid inline leSA
Can be used with avid lead clips
Fox Rage Split Ring Plier 5"
Designed to make swapping out trebles and changing rigs on split rings quick and easy.
High-quality construction from carbon steel
Gunmetal grey finish
Claw point at end of plier easily opens split rings without damage
Ergonomic, hard plastic, easy-find bright red and black handles
7cm length
Nash Braid Stripper
Three stripper diameters of 0.2mm, 0.3mm and 0.5mm cater for all breaking strains of links.
Finished in Nash cyan blue and black.
Three different diameters
Korda Spod & Marker Braid
Marker Braid Marker Braid is very low diameter and is designed to allow you to cast a marker float, and explore the lake bed, at ranges as far as you can cash with your actual fishing rods.
It has zero stretch and so transmits the feel of the lake bed back to your marker rod, and as it is a floating braid, once you do find a spot that helps to ensure that your marker float will pop up when you require it to.
It is dark green in colour which helps to make it as unobtrusive as possible when you are feature finding – either with a marker float or leading around.
Marker Braid is hard-wearing, which is essential considering how often you cast a marker float and drag it back through weed etc, and it also knots very well.
As it is so thin and only 20lb breaking strain, you will need to use a 30lb Arma-Kord shockleader to prevent crack-offs.
Each spool contains 300m of braid.
Key features Perfect for feature findingLow diameter and zero stretchFloating braidDark green colourSpod Braid Spod Braid is a braided main line for your spod rod and is designed to make baiting up as effortless as possible, even when fishing at long range.
This 20lb breaking strain braid has an incredibly low diameter, at just 0.16mm, so will allow a spod or Spomb to be cast as far as you are able to go with your fishing rods, and at shorter ranges allows you to do it with the minimum amount of effort as it casts so well.
Spod Braid is also very hard wearing, which is essential given how often it will be cast, and has good knot strength, but it does need to be used with a 30lb Arma-Kord shockleader to prevent crack-offs on the cast – keeping it damp whilst in use will also help to prevent frap-ups around your rod rings.
It is a hi-viz fluoro green colour, which not only makes sure that you can easily see where the line is when winding in, but also helps to scare birdlife (including seagulls) away from your swim as the braid travels through the air – especially useful when spodding our floaters.
Each spool contains 300m of Spod Braid, so unless you are spodding at long range, you could even fill two reels from it, as long as you use backing on your spools.
Key features
Designed for spodding
Extremely low diameter
Hi-viz fluoro green colour
Korda Ring Klips
The Ring Klip has been specially designed for the easy attachment of hook links. The unique design allows greater movement thanks to the ring section of the clip.
It can be easily attached to a swivel and used with a lead clip, or fished between two beads on a helicopter-style set-up.
They come in packs of 20.Key features
Quick and easy attachment of hook links
Ring gives extra movement
Non reflective coating
Korda Big Eye Swivels
These swivels have one very large round eye and one normal size one and, as with all our swivels, they come from the best Japanese manufacturers and have our trademark 'anti glint' dull-grey finish.
They have three major uses. Firstly, they make very smooth running rigs when used as a replacement to the swivels found on the top of our leads.
They were originally designed as part of the Running Rig Kits. But, after too many enquiries to mention, we had to add them to the range.
The second obvious use is for helicopter rigs.
The large eye will rotate better if a large bead is used, whereas a smaller swivel would bump around the larger beads circumference.
In other words, the large eye will slide effortlessly around it.
They can also be used at the top of a link for the marker float - the large eye will allow the line to pull through that bit easier than a standard swivel.
Key features
Large eye
Perfect for running and helicopter rigs
Anti-glint finish
Pack of 10
Thinking Anglers Line Gripper Beads 5mm Tungsten
5mm heavy tungsten beads with a small float stop inside, which grips your main line. They have multiple uses, but make especially good stops for Naked Chod fishing.
Supplied in packs of 12.
Thinking Anglers 10m Leadcore 45lb Olive Camo
Our 45lb leadcore is available in Olive Camo to suit gravel or weedy areas. The leadcore is broken up into 100mm alternating colour sections which aids its disappearance on all manner of lake-beds.
Our leadcore has a thinner lead wire than most on the market, making it much more supple, allowing it to lie flush over the contours of the lake-bed.
45lb
10m per item
Ergonomically shaped tubing threader to aid adding accessories onto tubing.
The stainless steel tube features a long slit to allow it to be compressed making it easier to thread silicone tubing, sleeves and beads onto the tube.
The tubing is slid into the Threader and that allows you to slide the silicone tubing, sleeve or bead off the threader and onto the tube.
Enhance your rig-making with the Nite Glo Strip n Snip Scissors.
Featuring super sharp, long-lasting blades, an integrated braid stripper tool, puller loop, puller peg and glow-in-the-dark handles for easy visibility. This all-in-one tool is perfect for cutting, stripping, and tying a variety of hooklink material.
The slim profile design, comfortable TPU overmould and razor-sharp blades offer precision and ease of use when rig making.
Product Specification
RMT439
GPSR information:
Caution: sharp blades
