Salmo Lil Bug
The Salmo LIL’ BUG is a perfect example of tradition and modern technology, all combined in one small lure.
This surface crankbait is perfect for ultra-light fishing enthusiasts and has been described as the best chub lure available.
Fitted with a long-cast design - Salmo Infinity Cast System (SICS) - LIL’ BUG is a great lure for casting into tight spots close to cover, or for drifting with the current until the correct position is reached before retrieving.
3cm
Best chub lure on the market
Preston KKH-B Mag Store Bayonet
Taking hooklength design to the next level. The Ready Rigs are constructed from the highest quality materials, and tied to precise specifications to create rigs suitable for all anglers. The fully loaded Rig Stick can be taken straight out of the packaging and placed into the correct sized Mag Store System box.Each pack contains 8 hand tied rigs which are stored on the rig stick, hook size along with line diameter and breaking strain can be easily identified by the attached sticker.KKH-B hooks are used on each rig, tied to the tried and tested Reflo Power line. The Banded rigs can be used for Pellets and Bandums while the Bayonet rigs are ideal for Boilie and Bandum hookbaits.
Preston Double Slider Winders
Each Double Winder features two sliders so two rigs can be neatly stored on each winder.
There is a slot for your hook and a peg which would hold a loop, meaning that rigs can be tied and hooklengths added at a later date if needed without kinking your line.
The sliding anchor can be moved along the full length of the winder. There is a small retaining spike at both ends of the slider so it doesn’t matter which way you wind your rig on.
The tapered ‘V’ hook holding slot can accommodate hooks as small as size 26 without damage.
Sliding anchor
Retaining spike at both ends
Tapered 'V' hook slot
Korum 4” Hair Rigs with Quickstops
Identical to the hugely successful Korum hair rig, but with a quickstop fitted. Brilliant for drilled pellets, sweetcorn and meat fishing.Product Features
Simple to use
You can change bait quick and easily
Tied ready to go
Brilliant for drilled pellets, sweetcorn and meat fishing
Fox Edges Rigidity Chod Filament Khaki
Chod filament available in trans khaki 25lb/0.53mm & 30lb/0.57mm, extra stiff rig material.
25lb or 35lb sools
30m spool
Fox Edges Reflex Sinking 20m Camo
Reflex Camo super-soft sinking braid that features a round profile it is the perfect hooklink material for solid bag PVA rigs or tying presentations where suppleness is key it also benefits from new and improved colour break camouflage to suit a wide variety of lake and river beds.
Excellent knot strength
20m per spool
20lb, 25lb and 35lb
Fox Edges Micro Rig Swivel
FOX swivels are manufactured with a non reflective coating and feature barrels that rotate smoothly under tension with perfectly formed eyes.
Micro rig swivels are perfect for the creation of Chod and Hinged Stiff Rigs and for other delicate presentations where rig subtlety is required.
Barrels that rotate smoothly under tension
Perfectly formed eyes
Perfect for the creation of Chod and Hinged Stiff Rigs
Non reflective coating
Nash Knot Puller
Securely beds down knots to hooks, swivels and loops for optimum rig strength and performance.
A small loop allows hook knots to be drawn down tightly. Finished in Nash cyan blue and black.
Secures knots
Small loop allows hook knots to be pulled down tight
Finished in cyan blue and black.
ESP Leadcore Stop Beads
The frame contains 20 beads, 10 with a large bore and 10 with a small bore with a central membrane.
The large bore bead is a perfect interference fit over the 0.5mm silicone tube supplied with the beads.
This is designed to be fished as the upper bead on the leadcore leader, so that in the event of a break off the bead can easily pop off the silicone tube under minimal pressure, and slide over the leader knot, allowing a hooked fish to rid itself of the leader. The small bore bead has a central membrane which can be pierced with a splicing needle and threaded onto the leader.
This provides a snug interference fit directly on the leadcore, which will slide down under minimal pressure.
Perfect for fishing ‘semi fixed’ chod rigs up the leader or for preventing the hook on a chod rig from coming into contact with the lead by setting the bead three or four inches up the leader. These beads allow for really neat versatile and safe setups and are available in three colours, weedy green, camo brown and choddy silt to complement the different colour blends of ESP leadcore.
A superb little product which will be a useful addition to the tackle box of leadcore fans. Features:
20 beads, 10 with a large bore and 10 with a small bore
Interference fit directly on the leadcore
Section of 0.5mm silicone tubing
ESP Leadcore Bulk Spool 45lb
The original camo leadcore was one of the items on the initial product launch way back in 1999 and it has cetainly stood the test of time, being still widely regarded as the best Leadcore out there.ESP Leadcore is extremely supple due to the soft lead core and as a result, it hugs the bottom and follows its contours making this some of the most inconspicuous and efficient leader material available.The Leadcores individual shades darken down when wet to blend perfectly with their respective backgrounds. Fast sinking, reliably strong, easy to splice.Available in Original Camo Brown, Weedy Green and Choddy Silt to closely match a variety of different substrates.
Features:
25m
45lb (20.5kg) breaking strain
Fast sinking
Reliably strong
Easy to splice
Extremely supple
Hugs the bottom and follows its contours
ESP Chod Rig Sleeves
The flexible silicone tube is mounted onto a soft sleeve which houses the lead retaining clip and provides a neat, streamlined system.
You might wonder why this component is comprised of two parts, rather than being moulded as one piece.
Well, the thermoplastic rubber used to mould the clip link retaining sleeve is malleable yet tough and is perfect for sleeving the clip link yet does not have the soft flexibility and inherent ‘spring’ of good old silicone tube so ESP have combined the two materials to create the perfect shock absorber buffer sleeve for chod rig work.
The silicone tube can be shortened if required, as can the clip retaining sleeve if the leader is tied directly to the lead loop.Features:
6 per packet
Soft, flexible silicone sleeve acts as a buffer
Prevents the hook from coming into contact with the lead
Korda Leader Safe
The Leader Safe is a compact way of storing your pre-tied leadcore and Dark Matter leaders, in a way that avoids them becoming damaged or tangled when not in use.
Two different sizes are available – small will hold three leaders, and large can be used to store six leaders – and the leaders are stored on the hard plastic insert which has been designed with slots to hold Hybrid Lead Clips, Heli-Safe Stems, or swivels (depending on what you have attached to the end of the leader), securely in place when not in use, with the rest of the leader wound around the Leader Safe in the corresponding channel.
A clear, hard plastic outer casing means that they can’t come unravelled – although if you are using them in conjunction with the Tackle Box, this case will need to be removed in order for them to fit.Key features
Use to store pre-tied leaders
Specially designed to take Hybrid Lead Clips and Heli-Safe System
Outer casing prevents them coming loose
