Nash Swivel Bait Screw
Threaded metal bait screws with micro ring swivel used to pierce and grip boilies, pop-ups, nuts, foam and plastic baits ideal for fast hookbait changes without the use of a needle.
Available in 8mm and 21mm for hookbait flexibility.
Ten per packet.
ESP Hi Performance Carp SwivelsThere are lots of very similar looking swivels on the market but many of them are of totally inferior quality.
Our Hi-Performance Carp Swivels are produced in Japan to exacting engineering standards providing a smooth rotation even under pressure. These have no rough edges or angles and are ultra smooth and finished in a pearl black metallised coating.
They have a 50lb test rating and each is formed from round section wire.
Features:
20 per packet
50lb test
Pearl black metallised finish
Ultra smooth
Eyes formed with round section wire
Thinking Anglers Forceps
Quality forceps are as essential to good carp care as an unhooking mat or a bottle of carp treatment.
At times it’s inevitable that a hook will bury deeply, or be in an awkward position making it difficult to lever out cleanly using gentle finger pressure.
Using forceps makes hook removal far easier and less stressful for both you and the fish!
These 5” short-nosed forceps will allow you to get a really firm hold of the hook, even if there is only a relatively small section of metal to grip onto.
Gently rotate the hook, withdrawing it along the same angle that it penetrated, being mindful to be as gentle as possible, avoiding any damage.
5’ in length
Black in colour
Guru SMWG Bait Bayonet 4" Rig
The SMWG Bayonet Ready Rigs are the perfect hooklength option for hair rigging hookbaits like wafters, boilies, and pop-ups.
The SMWG rig features a Guru Bayonet at the end of the hair rig.
This is intended to be pushed into your chosen hookbait.
You’ll also notice a tiny piece of 0.3mm Micro silicone on the shank of the hook and hair rig which is there to keep the hookbait in place and make sure the rig is working perfectly.
These Ready Rigs work exceptionally well when you’re fishing the Hybrid/Method feeder for carp and F1’s with wafter hookbaits.
The loop in the end of the Bayonet enables semi-buoyant wafters to sit upright off the bottom and work as intended.
This version features the extremely popular SMWG hook, which is PTFE coated, giving a super-sharp, longer lasting point.
The 4” Ready Rigs comes pre-tied on our reliable rig boards.
In the 10, 12 and 14 sizes we have improved the line diameter options to offer even more choice in these larger sizes (see size chart below for options and diameters).
All our Ready Rigs are tied on our tried and tested N-Gauge line.
Proving over countless years to be a firm favourite amongst pleasure, coarse and match anglers.
Improved line diameter options
Perfect for wafters, boilies and pop-ups
Optimum hair length
Comes with a Guru Bayonet to mount hookbait
Micro silicone on the shank of the hook
Ultimate carp and F1 hooklength option
Quick and easy to change bait
Features PTFE coated SMWG hook
8 Rigs per pack
Tied on our tried and tested N-Gauge line
Preston In-Line Match Cubes
As part of the Inter Change System the Inline Match Cubes allow the angler to alternate lead sizes without disassembling the entire rig, and are compatible with the full range of Inter Change System feeders and products.The stem remains on the line allowing the lead to be changed quickly and easily via the centrally located groove. This also ensures your rods are safe when packed away, simply remove your lead and wind in any slack line until the tail rubber rests against the tip ring of your rod.
No more leads damaging your rod blank in transit. The Inline Match Cubes cast extremely well and will hold on sloping lake beds making them perfect for casting to far bank features and islands.
The inline design also promotes self-hooking as the fish dislodges the heaviest part of the lead first, leading to more fish in the net. Available in 4 different sizes and supplied in packs of 2: 15g, 20g, 30g, 45g.
The Inter Change System’ is a new dimension in feeder fishing. A comprehensive collection of feeders, bombs and associated products that allows the angler to alternate feeder sizes and weights without disassembling the entire rig.With solid Zinc Alloy construction and multiple configuration options the ICS range provides something for every feeder angler.
Inter change system
No need to disassemble the rig each time
Casts well
Can interchange with a dura banjo feeder
Fox Edges Arma Point Curve Shank Medium Micro Barbed Hooks
Edges Arma Point Hook Range It had to happen didn’t it?
Our Edges range of terminal tackle has taken the carping world by storm over the past three years with anglers across the globe appreciating that we had taken rig component design to a whole new level.
There was of course one item of terminal tackle that our product development team hadn’t given the Edges treatment too, and that quite simply is because it has taken them many years to design, develop and test this range.
We haven’t simply picked up a hook manufacturers catalogue and picked a few patterns off the shelf, oh no, we have drawn up the patterns from scratch using the latest CAD software packages to ensure that every single detail in every single pattern is exactly how they need to be for the modern carp angler.
The end result is an Edges Arma Point hook range that features eight patterns, and that are in our opinion and that of our angling consultants, the strongest and sharpest out of the packet hooks you will find on the market.
Perfect for both bottom bait and pop-up presentations
Ideally suited for the popular 360 Rig presentation
Utilize Arma Point technology
Needle-sharp straight point
Inturned eye
Aggressive medium-length curved shank helps the hook to turn and grab hold in the fish’s mouth
Non-reflective dark coating
Super-strong yet lightweight XC80 Vanadium forged steel construction
10 per packet
Nash Pinpoint Fang X Hooks
The Nash Pinpoint range utilises the latest technology in carbon steel alloys, CARBIDE 617, resulting in hooks up to 50% stronger yet actually lighter than the already leading Nash patterns.
Point design and penetration is what you would expect from Pinpoint – the sharpest available.
Now stronger, sharper and lighter through Pinpoint advanced manufacturing and materials
Curved shank and 20 degree down turned eye for anti-eject performance and rock solid hookholds
Versatile for almost any presentation
Fox Rage Big Eye Spin Tail
Compact body design for longer casts
Big eye design for specific target strike point
Silver colorado blade for maximum flash and vibration
High-quality VMC hooks
Environmentally friendly Zinc Alloy construction
Drennan Loafer
Drennan Loafers are one of the most popular and versatile floats for running water. Made by blow-moulded plastic, they are light and extremely tough.
Being clear, they are unobtrusive and their buoyancy offers excellent visibility in turbulent water.
These floats can be used from everything from trotting bread and maggots for roach and chub to fishing small fish baits for species like perch.
Unobtrusive
Blow-moulded plastic
Highly buoyant
Tough
Durable
Visible at distance
Perfect for long trotting
Great chub float
Drennan HTN Plate 6" Wide Gape Carp
Barbless Wide Gape Carp Hooks To Nylon feature a strong hook with a wide crystal bend, perfect for targeting carp.
An extra-wide gape definitely helps hook more fish, especially as baits tend to sit down nicely in the flat, slightly square shaped bend.
This hook has a short shank which can be largely hidden within the bait.
The extra-wide gape of this hook pattern holds all big soft baits such as meat extremely well.
Hook Plate SystemNew Concept ultimately convenient 6” (15cm) – 8 individual pole hooks to nylon. Stored flat and straight under slight tension without kinks in the mono so they present perfectly and fish perfectly.
Precise whipping knots and consistent loops these new concept pole hooks to nylon can be used straight from the flat plates or stored in the matching Hook Book or Hook Box.
Bronze finish
Barbless
Wide crystal bend
Medium shank
Spade end
Forged
Chemically etched needle point
Fox Edges Arma Point Wide Gape Straight Micro Barbed Hooks
It had to happen didn’t it? Our Edges range of terminal tackle has taken the carping world by storm over the past three years with anglers across the globe appreciating that we had taken rig component design to a whole new level.
There was of course one item of terminal tackle that our product development team hadn’t given the Edges treatment too, and that quite simply is because it has taken them many years to design, develop and test this range.
We haven’t simply picked up a hook manufacturers catalogue and picked a few patterns off the shelf, oh no, we have drawn up the patterns from scratch using the latest CAD software packages to ensure that every single detail in every single pattern is exactly how they need to be for the modern carp angler.
The end result is an Edges Arma Point hook range that features eight patterns, and that are in our opinion and that of our angling consultants, the strongest and sharpest out of the packet hooks you will find on the market.
Perfect for both bottom bait and pop-up presentations
Utilize Arma Point technology
Long, needle-sharp straight point
Aggressive 25 degree inturned eye
Non-reflective dark coating
Super-strong yet lightweight XC80 Vanadium forged steel construction
Korda Kruiser Mono
This line is specifically designed for floater fishing, either as a main line or hook link material.
It is clear so as to be as inconspicuous as possible, as well as being very supple and limp, which helps your hookbait to move as naturally as possible when a carp sucks it in.
It has enough stretch that it helps to provide some shock absorption when a fish is hooked.
It comes on a 150m spool – plenty enough for floater fishing even when used as your main line.Key features
Main line or hook link material
Perfect for floater fishing
Clear and inconspicuous
Good shock absorption
