Terminal Tackle

Korda Heli Safe Tubing Kit The Heli-Safe Tubing Kit enables you to overcome Leadcore and Leaders bans by allowing you to fish a helicopter style of rig using rig tubing.  This conversion kit allows the Heli-Safe System to be used with tubing whilst retaining all of the usual features of a traditional helicopter set-up and giving you the ability to drop the lead if you need to. As you know, helicopter set-ups have great anti-tangle properties, you’re able to cast them a long way and they allow the top bead (recently update to a on this kit) to be set to determine how the hook link settles on the bottom. For those of you that don’t use heli type rigs… you can basically adjust the bead to allow for what your rig is landing on. If it’s on a hard bottom the distance can be short, low lying weed the distance can be increased and for something like deep silt it can be pushed right up, allowing the lead to plug into the silt but leave the rig to settle on top. The solution to the problem may look very simple, but a lot of thought and testing has gone into getting the Heli-Safe Tubing Kit just right, so that it performs in the intended way in terms of still dropping the lead. INCLUDE THIS WITH THE ABILITY TO TAKE IT OUT We did initially release this product back in 2018 but after it come to our attention that some of the Tungsten Beads – designed to fit snugly onto rig tube had suffered an issue during the manufacturing process. They were too tight when used on Dark Matter Rig Tube, creating a potential safety issue with the setup. We removed the product from shelves as a precautionary measure as our priority has always been to ensure carp remain safe with anglers when using our products. We have since replaced the tungsten bead with a silicone sleeve combined with our brilliant No Trace Bead. This small plug is known as a ‘witch’s hat’ and is located inside the Heli-Safe, it’s part of the very clever design and holds the tubing in place. When used in conjunction with an adapted Heli-Safe ‘cap’, featuring a hard plastic ‘tail’, this ensures that the tubing can’t come loose and that the system works as it was originally intended to. The ‘witch’s hat’ is the cleverest part of this product, as it holds the tubing securely in place… it can be used with either our Dark Matter tungsten or plastic Kamo rig tubing. The Heli-Safe Tubing Kit is sold in packs that include everything that you need for two complete set-ups (excluding the tubing). They also come in a choice of brown or green to match the lakebed. Key features Connects to original Heli-Safe Enables helicopter style fishing whilst using rig tubing Adjustable bead Includes drop-off safety bead

Read more less

Korda N-Trap Soft Coated Hook Link SoftN-Trap Soft is one of our earlier coated braid materials, yet it is still very popular and is suitable for tying a vast variety of different rigs, such as the multi rig. It features a tough, matt coloured coating which is very easy to strip, yet won’t split when tightening down knots, and is still limp enough that it will sit flush to the lakebed. The inner braid is a very tough Dyneema, which matches the colour of the coating, to help make it as unobtrusive as possible, and comes in a choice of Weedy Green, Silt or Gravel Brown versions. Each spool contains 20m of N-Trap Soft.Key features Coated braid hook link material Soft and supple Tough coating won't split Dyneema inner braid

Read more less

Korda Razor Blade Scissors These stainless steel scissors will effortlessly cut through any of our hook link or main line materials, whether they be braid or mono, and leave a very clean edge, thus making it easier to pass it through the eye of a hook, or similar. The handles are big enough even for those with larger fingers, but overall the Razor Blades are small enough that they will easily fit in a compartment in your Tackle Box or Tackle Safe. Unlike many carp fishing scissors on the market, these feature bright green handles, so that if you do drop them in the undergrowth you can actually find them.Key features Cut mono or braid cleanly Stainless steel Handles designed to fit any size fingers

Read more less

Drennan Latex Pellet Bands Latex Bait Bands are super stretchy pellet bands that are massively versatile and can be used for small baits when after skimmers and little F1's right the way up to dog biscuit fishing for carp. The dark coloured bands are also perfect for banding halibut pellets for barbel on rivers. These latex bait bands stretch more and grip better than previous versions and are flexible enough to be pulled through drilled pellets using a baiting needle. Pre-cut ready to use and, by buying the appropriately sized bands, they will fit all sizes of pellet. They are also flexible enough to be pulled inside drilled boilies and pellets using a Drennan Band Puller. Approximately 30 bands per wallet Dark brown Match halibut pellets Durable

Read more less

ESP Heat Shrink Tube When heated the Heat Shrink Tube will reduce in size to half its original diameter, forming a tough protective sleeve which can be curved or angled. Available in three diameters with the 1.6mm best for line aligner rigs and the 2.4mm for Ronnie rigs. The 3.2mm can be used for sleeving lead loops and swivels.Features: 10 x 50mm lengths Matt dark olive green The 2.4mm is ideal for Ronnie rigs The 1.6mm is best when tying line aligner rigs as a 'kicker'. Forms a tough protective sleeve

Read more less

Ridge Monkey RM-Tec Needles Splicing An ultra-fine, lip-close splicing needle designed to be used with any spliceable leader or hooklink material. Also excellent for hair-rigging small soft baits such as sweetcorn, 10mm boilies and soft pellets. Nite Glo handle with yellow inserts. Mini Stick A very strong, low diameter lip close needle, engineered to the perfect length for use with all but the longest PVA mesh sticks and stringers – the micro-engineered gate closes to allow smooth passage back through the bait when pierced. Nite Glo handle with purple inserts. Braid A strong, fine-wire needle with a low profile safety barb contained within the tip to reduce the chance of a frayed hair or split bait. Excellent for small and/or soft baits. Nite Glo handle with magenta inserts. Lip Close A superb general purpose baiting needle, perfect for most situations. The micro-engineered gate closes to ensure smooth passage back through the bait when pierced. Also excellent for threading hook links through short PVA mesh bags. Nite Glo handle with orange inserts. Boilie A great general purpose baiting needle with a smooth crooked head and non-tapered body. Essential for hair-rigging large baits such as boilies, pellets and luncheon meat. Nite Glo handle with green inserts.

Read more less

Guru Plummets Guru Inline Plummets feature a unique design for unrivalled accuracy when feature and depth finding. The plummets are designed so the line goes straight through the middle of the plummet’s axis, allowing anglers to find the depth with millimetre accuracy Unique inline design
 Unrivalled accuracy


Read more less

Catfish Pro Maruto Eagle Wave Hooks Simply the best catfish pattern, the top selling catfish hook across Europe. Distinctive squared designed with long point, offset point and wide gape, ideal for bulky catfish baits with the power to land the biggest fish.

Read more less

Korda Dark Matter Ultra Heavy Tungsten Putty Dark Matter Putty contains tungsten and is very heavy for its size, making it the ideal choice of rig putty for pretty much anything relating to adding weight to your rigs. The non-toxic putty is incredibly malleable, even straight out of the tin which it comes in, and means that it can easily be moulded around micro swivels or a knot, such as when balancing a pop-up rig. It can also be added to one of our Sinkers to give it more weight, or to the end of our fused leaders or tubing to make doubly sure that it is pinned down to the bottom. It will stay in place during the cast, and comes in a choice of Weed Green or Gravel Brown, so that you can match it to the type of bottom you are fishing over, as well as your other rig components. Each tin contains 25g of Dark Matter Putty. Key features Tungsten rig putty Heavy for its size Perfect for balancing pop-ups Grips and stay in place on the cast

Read more less

ESP Silicone Tube Silicone tube has a multitude of uses in carp fishing and with five diamters available the ESP tube covers everything. From trapping the hair against the hook shank and using for the toip bead on leadcore with the 0.5mm, to multi rigs with the 0.75mm and 1.0mm, to sleeving lead loops and swivels with the 1.5mm and 2.0mm.Features: 2m lengths Weedy green Durable Many uses

Read more less

Drennan HTN Plate 6" Margin Carp Barbless Margin Carp Hooks To Nylon feature an extremely strong hook designed for tackling those lumps down the edge. These hooks to nylon feature a long needle-point that is slightly curved with the very tip turned in to provide a really good secure hook hold. Ideal for fishing on extra strong pole gear. Hook Plate SystemNew Concept ultimately convenient 6” (15cm) – 8 individual pole hooks to nylon.  Stored flat and straight under slight tension without kinks in the mono so they present perfectly and fish perfectly.  Precise whipping knots and consistent loops these new concept pole hooks to nylon can be used straight from the flat plates or stored in the matching Hook Book or Hook Box Bronze finish Barbless Special bend Medium shank Spade end Forged Chemically etched curved needle point

Read more less

Fox Edges PVA Mesh Fast Melt Refill Highest quality anti-ladder PVA mesh is designed for refilling your Edges PVA Mesh System there are three sizes available - Stix 14mm, Narrow 25mm and Wide 35mm. Available in Fast Melt for winter use or in shallow water

Read more less