Ridge Monkey Ape-X Straight Point Hooks
Combining many years of manufacturing and angling experience, the Ape-X hook range has been designed to cover every carp and specimen fishing situation.
Extensively tested for over two years, our state of the art manufacturing processes utilise the most advanced hook point technology available which allowed us to create a range of hooks that are unrivalled in strength, sharpness and point durability ensuring you can use the Ape-X range in any scenario with 100% confidence.
10 per packet
Ultra-sharp Straight point
Super-strong Japanese Carbon 80 Steel
Straight eye
Forged Bend & Shank
Unique RM-Tec Gun Metal Coating
Long Needle Point with Micro Barb
Preston MCM-B Bayonet Rigs
Taking hooklength design to the next level. The Ready Rigs are constructed from the highest quality materials, and tied to precise specifications to create rigs suitable for all anglers.
The fully loaded Rig Stick can be taken straight out of the packaging and placed into the correct sized Mag Store System box.Each pack contains 8 hand tied rigs which are stored on the rig stick, hook size along with line diameter and breaking strain can be easily identified by the attached sticker.MCM-B hooks are used on each rig, tied to the tried and tested Reflo Power line. The Banded rigs can be used for Pellets and Bandums while the Bayonet rigs are ideal for Boilie and Bandum hookbaits.
Nash Quick Change Drop Off Inline Swivel Size 8
Bringing the convenience of instant rig replacement to drop off in line end tackles. Leaders can be spliced to the large ring, with the neat quick change hook securing any looped hooklink with a sleeve.
Perfect for boat work, margin fishing and solid PVA bags.
Ten per pack.
ESP Tapered Shockleaders
Tapered shock leaders are designed specifically for long range distance casting with big leads.
Tapered Leaders greatly reduce stretch and means that all the casting power is transmitted directly to the lead for greater distance. Their ultra slick surface finish means they absolutely fly out through the rings.
When using a standard 12ft rod the 9-metre leader equates roughly to three or four turns on the reel spool plus the length of the rod above the reel, plus a 5ft or 6ft casting drop down from the tip ring.
Features:
15lb to 40lb (0.37mm to 0.59mm)
3 x 9-metre leaders
Not just tapered nylon, but an advanced low stretch polymer with a super slick finish
Low friction surface simply flies through the rod rings
Available in:
Crystal clear
Weedy green
Korda Durakord 45lb
This incredibly strong and tough leader material has been specifically designed for use in the most demanding of situations, where snags are a problem.
It is made from a blend of Dyneema and polyester to produce a leader material which can easily be spliced, and which will also absorb water to ensure that it sinks very well.
In addition to being incredibly tough and reducing the chances of being cut-off, it has also been designed so that it is thick for its breaking strain, with the idea being that this will help to prevent it from cutting into submerged trees and stumps – or any type of underwater woodwork – and instead it will rub across it and give you a greater chance of landing a fish in this situation.Key features
Heavy duty snag leader
Incredibly strong and abrasion resistant
Absorbs water and sinks very well
Can easily be spliced
Thinking Anglers Zig Tools
This tool allows Zig Barrels or 6-8mm foam to be easily loaded into the TA Zig Kicker. Position the foam inside the tool so the clasp is halfway along the foam.
Then thread the narrow end of the tool up through the retaining loop, teasing the loop over the taper until the preformed loop drops centrally onto the foam barrel.
Supplied in packs of 3.
Thinking Anglers Tungsten 5mm Leadcore Safety Top Bead
5mm round tungsten bead with a piece of silicone in the centre. Perfect for use as a top bead on a leadcore or lead-free Helicopter set-up as the bead pulls free of the silicone under pressure, allowing the rig to slide off the leader in the event of a crack-off or cut-off.
Supplied in packs of 8.
Thinking Anglers 5mm Round Tungsten Beads
5mm round tungsten beads with an ultra-fine, ‘pin-hole’ bore. Great when used as a bottom bead on a leadcore Helicopter set-up.
Supplied in packs of 12.
Thinking Anglers Hard Hookbait Needle, A baiting needle thats been designed to make mounting extra hard hookbaits safe and easy. Features an easy-grip handle and a hard, extra strong needle with a hooked end.
Key Features
Makes mounting extra hard hookbaits safe and easy
Features an easy-grip handle
Hard, extra strong needle
Featured on the end is a hooked end
These 30cm pre-spliced leaders are constructed with our super supple and fast sinking Sub-Fleck PTFE Leadfree. They feature an extended 2cm spliced loop for ease and speed when looping on pre-prepared bags after a capture. The PTFE coated size 8 Ring Swivel allows the rig to react in all directions. These leaders are ideal for use with inline leads – each leader is supplied with a colour matched camo tail rubber. Simply detach/attach by means of looping on and off by tying a large figure 8 loop knot in the end of your line. Supplied in a pack of 3.
These 30cm pre-spliced leaders are constructed with our super supple and fast sinking Sub-Fleck PTFE Leadfree. They feature an extended 2cm spliced loop for ease and speed when looping on pre-prepared bags after a capture.The PTFE coated size-eight Quick Link swivel allows you to instantly change rigs. These leaders are ideal for use with inline leads – each leader is supplied with a colour matched camo tail rubber. Simply detach/attach by means of looping on and off by tying a large figure 8 loop knot in the end of your line. Supplied in a pack of 3.
MAKE CRIMPING A BREEZE.
The CRIMP MY STYLE Tool takes the hassle OUT of knot tying! Delivering clean, secure crimps every time. Precision grooves for 0.5, 0.6, and 0.7mm crimps make it perfect for a wide range of Stiff Coated Braids, Monofilament and Fluorocarbon Hooklink materials.Built from solid CARBON STEEL and finished with a soft-touch ergonomic handle, this tool doesn’t just get the job done—it does it in style.
“Strong Like Bull”
New to Crimping? Check out Roo Abbott's Step by Step process above for his favourite Lock Hook Ronnie Rig.
Fish safety should be paramount in every aspect of carp-fishing and these inserts have been designed to ensure a safe setup when using Korda inline leads. If your line parts whilst using the Inline Safety Sleeves, the lead can easily slide off the sleeve and over any shockleader knot you may be incorporating.
The sleeve loosely sits inside the lead and only locks into place when the Korda size 8 swivel is inserted. Following any breakages, when pressure is applied to the lead it will release the swivel and the lead will easily fall free.
This version has been specifically designed to be used with Nano Tubing and Leadcore. Nano Tubing is more slimline than standard tubing, so not all tubing will be compatible. The sleeves have a streamlined design and a slimline inner core to ensure a tight fit, which eliminates the need for a tail rubber and again greatly improving the fish safety aspect.
The Inline Safety Sleeves have been specifically engineered for inline lead systems. At its core, this design prioritises the well-being of our carp, while maintaining optimal fishing efficiency.
Available in three sizes (small, medium and large), these Inline Safety Sleeves seamlessly integrate with our complete inline lead range, accommodating weights from 1.1oz to 8oz. Each sleeve provides a snug, secure fit while maintaining its quick-release capabilities under pressure.
Key features
Fits all inline leads
Compatible with Nano Tubing or Leadcore
Insert fits all size 8 Korda swivels
Streamlined design
Perfect for using with Solid Bags
Available in 3 lengths
Naked-line version also available
