Spomb Braided Leader Black 50lb
Spomb Braided Shockleader is great for reducing crack-offs when spodding, recommended for use alongside spomb braid always use a finger stall or glove.
Incredibly strong braided shock leader material
Dramatically reduces crack-offs when spodding
Excellent knot strength
Ultra smooth
Neutral buoyancy
Recommended for use alongside Spomb Braid
Always use a finger stall
Nash Cling-On Fused Helicopter Leader
Low diameter fast sinking and extreme abrasion resistance fused leader Helicopter end tackle.
Long casting, anti-tangle performance with a quick change clip and quick change Heli Swivel for instant lead and hooklink replacement.
One leader per pack
Weed or Silt
ESP Tapered Shockleaders
Tapered shock leaders are designed specifically for long range distance casting with big leads.
Tapered Leaders greatly reduce stretch and means that all the casting power is transmitted directly to the lead for greater distance. Their ultra slick surface finish means they absolutely fly out through the rings.
When using a standard 12ft rod the 9-metre leader equates roughly to three or four turns on the reel spool plus the length of the rod above the reel, plus a 5ft or 6ft casting drop down from the tip ring.
Features:
15lb to 40lb (0.37mm to 0.59mm)
3 x 9-metre leaders
Not just tapered nylon, but an advanced low stretch polymer with a super slick finish
Low friction surface simply flies through the rod rings
Available in:
Crystal clear
Weedy green
Fox Edges Fluorocarbon Fused Leader Kwik Change Size 7
Fused fluorocarbon leader with a clear plastic outer coating and fused loops at each end allow the leader to be used for helicopter, running and inline lead presentations - simply thread on chosen rig components and then loop on the desired swivel to the end. 30lb breaking strain and non-glare, anti-spook finish.
Fused fluorocarbon leader with a clear plastic outer coating
Supplied with Edges Kwik Change Swivel
30lb breaking strain
Non-glare, anti-spook finish
115cm long
Nash Braided Shock Leader
Tested and developed by Marc Voosen the new Braided Shock Leader uses PE fibres 15 times stronger than steel for their diameter and is the ultimate choice for the most animal casting.
Featuring massive shock strength for the heaviest leads and Dot Spods, a slick Teflon coating improves abrasion resistance, reduces friction through the rings and helps eliminate ring wrap when repeatedly casting.
Also doubles as a superb snag leader.
Low-viz green finish.
Korda Durakord 45lb
This incredibly strong and tough leader material has been specifically designed for use in the most demanding of situations, where snags are a problem.
It is made from a blend of Dyneema and polyester to produce a leader material which can easily be spliced, and which will also absorb water to ensure that it sinks very well.
In addition to being incredibly tough and reducing the chances of being cut-off, it has also been designed so that it is thick for its breaking strain, with the idea being that this will help to prevent it from cutting into submerged trees and stumps – or any type of underwater woodwork – and instead it will rub across it and give you a greater chance of landing a fish in this situation.Key features
Heavy duty snag leader
Incredibly strong and abrasion resistant
Absorbs water and sinks very well
Can easily be spliced
Nash Cling-On Fused Lead Clip Leader
Low diameter, fast sinking extreme abrasion resistance fused leader Lead Clip end tackle finished with a quick change swivel for instant replacement of looped hooklinks.
One per pack
Weed or Silt
Korda Subline Tapered Leaders 12-40lb*
This is the perfect choice for anyone who prefers to use a monofilament leader, or where braided ones are banned and you have no other choice when fishing at long range.
Attaching a thick mono leader to your main line creates a bulky knot, which not only reduces casting distance, but also makes it prone to crack-offs, due to the differing diameters and stiffness of the two lines that you are joining, and the way they travel through the rod rings.
The SUBline Tapered Leaders prevent any of these problems, as at one end they are the same diameter - and breaking strain - as the main line that you will be using for your long range fishing.
The leader tapers taper up to 40lb at the thicker end, which will take the brunt of even the hardest cast, whilst also offering a bit of stretch when you have a fish under the rod tip.
They are 12m long, so you can cut them back to suit your requirements.Key features
Tapered monofilament shockleader
Tapered design increases casting distance
Provide some stretch under the tip
Can be cut back from their original 12m length
Korda Armakord 85lb XT
This braided leader material is incredibly tough and abrasion resistant, making it a great choice of shock or snag leader material.
It is thin for its breaking strain and as well as being tough, it is also supple enough that it casts very well when being used as a shockleader, such as when spodding.
It is more buoyant than the Arma-Kord Sinking version which we also sell, and in some situations this makes it more suitable as a snag leader as well – such as when fishing over tree stumps or similar snags close to the bottom, where you don’t want something that sinks too far in amongst them.
For even more extreme fishing in Europe there is an 85lb breaking strain XT version.
There is 20m of Arma-Kord on each spool.
Key features
Shock or snag leader material
Incredibly tough and abrasion resistant
Low diameter for its breaking strain
Thinking Anglers Ready Leader C-Clip Set Up
Ready-made C-Clip leaders, tied to our own exacting specifications using our 45lb Olive Camo Leadcore, PTFE Double Ring Swivel Heli, Leadcore Safety Top Bead, C-Clip Brown Buffer Bead and Heavy Ring.
Three-feet long
Available in packs of 3.
