Korda Strippa Tool
This anodised aluminium tool makes it very easy to strip any coated braid material – and without any chance of damaging your teeth in the process!
It is extremely easy to use and has been designed so that it will strip the coating off but without damaging the braid inside.
The Strippa Tool also features a circular groove at each end which is useful for tightening for, especially loop knots.
It is finished in red to make it easier to find if you drop it.Key features
Designed to strip coated braids
Anodised aluminium
Won't damage internal braid
Special groove for tightening knots
Korda Spare Kontainer 3L
These additional Kontainers are compatible with the Kontainer System.
Each Kontainer is airtight and watertight, meaning that liquids can safely be stored in them without fear of spillages, and should you have baits such as particles leftover at the end of the session, you can simply pop the Kontainer in the freezer ready for use on your next session.
On a longer session, you can get spare Kontainers of bait out of the freezer just before you go, ensuring that it stays fresher for longer.
They also feature side markers in 0.25 litre divisions so that you can see exactly how much you are using and allows you to make precise spod mixes, with the same proportions of each component every time.
The Kontainers are stackable for easy storage, so you can just grab whichever ones you require for your session, and leave the rest in the freezer or garage at home.
Or even in your vehicle in the case of non-perishables such as different sizes of pellets, which is especially useful when on longer sessions and you only want to be carrying the bait that you need for that day, and then topping it up as and when required – there’s nothing worse than trying to barrow around, or boat across, a lake with loads of different buckets.
Key features
4 Kontainers will fit inside a 17l bucket
Soft lids ensure an airtight/watertight seal
Includes 0.25l side markers for precise spod mixes
Freezer safe
Suitable for storing particles and boilies
Stackable for easy storage
Korda LongChuck Tapered Mainline
The Long Chuck Tapered Mainline has been designed for casting at range in situations where you want to fish straight through without a leader knot – especially useful in weedy venues where that can gather around the knot and present problems under the rod tip.
The Long Chuck Tapered Mainline comes on a 300m spool, and at each end of that it features an 8m section of 0.47mm (30lb) diameter line designed to take the force of the cast - as well as offering good abrasion resistance when playing a carp – plus a 2m tapering section down to whichever diameter of main line you have chosen.
It is exactly the same at both ends, so should you experience a cut-off, you can simply reverse the line on your spool and use it again.
This tapered main line feature the same properties as the Long Chuck main line, with ultra-low stretch to help compress the rod (heavy mono is typically quite stretchy and hampers the cast); low water absorption; lightweight for its breaking strain, as it is clear (dye adds extra weight), so it stays in the air longer; and a high breaking strain to diameter ratio to reduce drag.Key features
Designed specifically for fishing at long range
Ultra-low stretch
Very low water absorption
Clear mono line
High breaking strain to diameter ratio
300m reversible spool with leader intergrated leader on each end
Korda Krank Choddy Hooks
Like the original Krank hook, the Krank Choddy was designed by head of product development, Tom Dove, after he noticed that the shape of the shank would be perfect for chod rig presentations.
The Krank Choddy is the same shape as the original Krank, but with an out-turned eye, so that when used with a stiff material such as Mouth Trap there is a continuous curve all the way along the hook link and hook shank, making it the ultimate chod presentation.
It has a razor sharp beaked point, which is slightly offset with a very wide gape, to increase the hooking potential and ensure that you get a good hook hold.
It is a very strong pattern that is suitable for use in weedy and snaggy situations.Key features
Perfect for chod and stiff rigs
Out-turned eye
Razor sharp, beaked point
Very strong
We took our most popular Wide Gape hook and made a few design tweaks. The result is our ultra sharp and strong Straight Point hook.
By elongating the shank we’ve made the Straight Point slightly longer than the Wide Gape and we’ve in turned the eye by 15 degrees. The biggest design feature, however, is the tapered, eye-wateringly sharp, straight point. The end result is creating one of the most versatile and efficient hooks we’ve ever made.
Strength and durability were also a key consideration when designing this hook. We’ve stepped up the gauge of the Japanese steel making this hook as strong as the other X gauge hooks in our range. It’s been forged and PTFE coated ensuring lasting durability whilst maintaining a razor-sharp point straight out of the packet.
The Straight Point’s versatility was a critical part of the design process. Whether you’re fishing pop-ups on Spinners or wafters on D-Rigs this hook has got you covered. They come with intermediate sizing and can be used for most modern carp rigs out there.
The Straight Points are available in sizes 2, 3, 4, 5, 6 barbed and barbless and supplied in packs of 10.
Key features
Ultra sharp straight point
15 degree in-turned eye
PTFE coated
Elongated shank
Forged for extra strength
X-gauge strength
Intermediate sizing
Barbed and barbless versions
Korda Hybrid Olive Jacket
The Hybrid Jacket is a fusion of two of Korda’s most popular jackets; the Polar Fleece and the Puffer Jacket.
Taking the lightweight fleece properties of one and the hollow fibre technology from the other has created a blend of core warmth for the body, whilst achieving the manoeuvrability of a lightweight fleece.
The Hybrid Jacket is the complete all-rounder and allows casting and spodding in cold conditions, without inhibiting movement.
The fleece arms, side panel and hood are constructed from a heavy-knit fleece material.
This not only makes the Hybrid Jacket extremely comfortable and warm but also creates the flexibility needed when moving around.
The puffer-style mid-section will not only keep your core warm but is also incredibly comfortable to wear and won’t restrict your movement, thanks to the hi-tech materials used to make it.
The light padding utilises hollow fibre technology to provide the optimal amount of warmth from the lightest possible weight of material.
The mid-section is also windproof to help keep you warm when exposed to the elements, and that is enhanced by a longer than usual back, which helps prevent draughts and stops the jacket riding up above the top of your trousers when you sit down.
A snug-fitting fleece hood and high-zip neck can be zipped up around your neck helping to prevent any cold air getting inside the jacket.
The Hybrid Jacket also features two zipped, fleece lined pockets, useful for storing any item you need easy access to but are also great for keeping your hands warm. High quality zips have been used throughout.
A fusion of Polar Fleece and the Puffer Jacket
The complete all-round jacket
Perfect for casting and spodding in cold conditions
Extremely comfortable and warm
Minimal restriction of movement
Snug-fitting fleece hood and high-zip neck
Fleece lined pockets
High quality zips
Available in olive green
Korda Mini Box
This is more than just another Tackle Box, it is the ultimate in terminal tackle storage and every aspect of it has been carefully thought out.
It is larger than any of our other storage systems, such as the Tackle Safe, and is designed for those of you who like to take everything that you might need in one box, and have it stored in an organised way so that you can easily find what you are looking for.
You can customise it to exactly what suits you, thanks to the range of accessories that fit into it.
There are 29 compartments built into the lid of the box, with clear plastic flip tops to keep everything secure and allow you to see what is inside, and these can be used to store all sorts of smaller items such as swivels, rig rings, Heli-Safe, shrink tube, or anything of a similar size.
The lid also includes a rig board, complete with a machined, grooved hook retention bar and a magnet to hold your rigs in place, plus a ruler to help when constructing them.
The main compartment of the Tackle Box is open and split up into sections, with moveable dividers that allow you to customise it.
It comes set up so that our square hook link material spools, Kamakura hook boxes, EVA foam zig spools, and new Leader Safe, will all fit in perfectly, along with other items such as scissors and baiting needles.
This part of the Tackle Box will also take our Mini Compartment Boxes, which have clear flip top lids, and are sold separately in a choice of 6, 8, 9 or 16 compartments, to offer all sorts of different storage options for smaller items.
The Tackle Box is constructed from high impact plastic and is very durable, and closes magnetically to ensure that it can’t come open during transit, and means there are no fasteners to get stuck or wear out.
It will fit neatly into a Compac 220 EVA pouch.Key features
Designed for use with the Tackle Box
Flip top lids
High impact plastic
Various sizes available
Korda Kore Thermolite Puffer Jacket Olive
This puffer-style jacket will not only keep you warm whatever the weather, but is also incredibly comfortable to wear and won’t restrict your movement, thanks to the hi-tech materials used to make it.
It is filled with our THERMOLITE padding, which used hollow fibre technology to provide the optimal amount of warmth from the lightest possible weight of material, and which maintains that performance even when wet – which is a big advantage over traditional down-fillings.
The outer shell is made from a two-layer bonded fabric which is tough enough to withstand long term use on the bank and anything you might reasonably encounter whilst wearing it, without easily tearing or snagging.
The Thermolite Puffer Jacket is also highly water resistant, due to the outer material having a 3K hydrostatic head and a DWR (durable water repellent) coating, which is unique to this jacket and an industry first.
As well as being water resistant, it is also windproof to help keep you warm when exposed to the elements, and that is enhanced by a longer than usual back, which helps prevent draughts and stops the jacket riding up above the top of your trousers when you sit down.
A snug-fitting hood, which comes up from around your neck, also helps to prevent any cold air getting inside the jacket, as well as keeping your head warm and dry.
The Thermolite Puffer Jacket also features two zipped, fleece lined pockets, which not only are useful for storing any item you need easy access to, but are also great for keeping your hands warm.
High quality zips have been used throughout.Key features
THERMOLITE hollow fibre filling
Warm and lightweight, even when wet
Durable water repellant coating with 3K hydrostatic head
Zipped fleece lined pockets
Korda Kore Thermal Shirt
One of the most over-looked aspects of keeping warm in the winter is the use of base layers – which those engaging in many winter pursuits wouldn’t dream of foregoing.
This Kore Thermal Long Sleeve Shirt will keep you warm and is very comfortable to wear.
It is made from a quick-dry, brushed back material, which is designed to regulate your body heat and help to keep you warm, and in addition to these thermal properties, is also breathable and will wick moisture away from your skin.
It is a snug fit to hug your body contours, although is so lightweight you won’t even notice that you have it on, and is long enough that it won’t come untucked, plus the sleeves feature thumb holes to stop them riding up when putting another layer over the top.
It is the perfect choice when worn underneath something like one of our hoodies, jumpers or fleeces.Key features
Base layer
Quick-dry brushed back material
Regulates body heat
Breathable and moisture wicking
Long so won't come untucked
Korda Spare Leadcore Chod Sleeve
Spare sleeves for securing No-Trace Bead.
The full No-Trace System (sold separately) creates a completely safe set up for use on leadcore and similar diameter leader materials such as the fused Dark Matter range.
Specifically designed, that should your main line break above the leader knot, your hook link can easily come free from the leader and all the fish is left with is the hooklink, rather than towing around a leader, or worst still a lead as well.
No-Trace Beads are pulled free from this retaining rubber Chod Sleeve, which until required to release, holds everything securely in place on the leader for casting and normal use.
Spare No-Trace Beads and Leadcore Safety System are also sold separately.
Key features
Sleeve for securing No-Trace Bead
For use with helicopter set-ups
Easy to fit onto your leader
No-Trace Beads are sold separately
Full No-Trace System can be bought separately
Made available by popular demand, this tiny scoop is perfect for loading your PVA bags.
Originally, this PVA Scoop was only available as part of the Korda PVA Kontainer system. However, following numerous requests to make them available singularly, this neat little product can now be purchased separately.
This durable little scoop is available in one size and comes in a distinctive Korda green colour for easy recognition.
Key features
Perfect for loading bags
Durable
Distinctive colour
Korda Kaizen Green Net 42"
The Kaizen Green Landing Net has been developed off the back of the incredibly impressive Spring Bow landing net whilst maintaining the quality and competitive pricing expected of the Kaizen Green range.
Crafted with ultra-light carbon fibre, this landing net features a 6-foot handle with a reverse taper design.
The innovative construction ensures exceptional rigidity, allowing for swift and precise fish netting.
To enhance versatility, we've integrated a stainless-steel spike, enabling you to securely anchor the net into the lakebed for added stability.
Ingeniously engineered with robust yet lightweight components, the Kaizen Green Net boasts inherent buoyancy.
This clever design eliminates the need for an additional net float.
Simply place the net on the water's surface, where it will remain afloat until you're ready to net the fish.
The net also features a strong, injection-moulded spreader block with an aluminium insert ensuring superior durability.
Furthermore, there is a slot on the spreader block which fits a Mini Stow-Lite (not included) allowing you to locate the net in the dark.
The Kaizen Green Net is finished in sleek matt black with green Korda branding in keeping with the Kaizen rods and supplied in a premium Korda branded nylon sleeve.
Paired with a 42-inch shallow net mesh, this landing net combines functionality with style, making it the perfect addition to the Kaizen Green range.
Key features
6ft reverse tapered handle
Complete with 42-inch shallow net
Strong, injection moulded spreader block
Isotope slot
Reverse taper
Lightweight carbon fibre
Lightweight and naturally buoyant
Eliminates need for a net float
Stainless steel spike for securing into lakebed