Fox Rage Predator Paternoster Sunk Float
Designed to present baits off the bottom in both deep water and weedy situations. The silicone allows the float to be semi-fixed to your trace swivel for ease of casting. To be used with our Heli Rotary Uptrace.
Present baits off the bottom
Great in deep or weedy water
Can be semi fixed to your trace
Use with heli rotary uptrace
Fox Rage Saw Tooth Cutters
A pair of scissors and pliers combined. With this tool you can cut, without any problem, thin lines and also loose ends of nylon, hard mono, fluorocarbon, steel wire. Even titanium leaders can be cut and adjusted with these cutters.
MATERIAL: Stainless Steel construction, mirror polished with treated cutting edge and spring loaded handle & lock guard.
Scissors and pliers combined
Great for nylon, hard mono, fluorocarbon, steel wire
Can even cut titanium leaders
Treated cutting edge
Spring loaded handle
Fox Rage Predator Run Rings & Buffer Beads
These offer minimal resistance to predators when ledgering. This dramatically reduces the number of dropped runs and converts more pick-ups to hooked fish.
Minimal resistance when ledgering
Reduces the number of dropped runs
Hopefully catches you more fish
Fox Horizon Duo Pod
The new Horizon Duo Pod bears little resemblance to the original Horizon Pod and is now more like a bigger twin rail version of our Stalker Pod.
Twin rail design for extra stability
Four leg position angles (allowing for rod tips to be pointing towards sky for long range fishing)
New Double Cam levers
2 x Karabiner mounting points to tie/weigh down the pod
All brass thread fittings (no oxidisation)
New rubber ‘bumper’ on ‘head’ moulding to protect your swinger head once it detaches from line and hits pod
Standard leg lengths 33cm & 25cm
3-rod and 4-rod versions available
Carry case as standard - Incorporating; A full length zip + built in storage for additional XL legs. Carry case also has snag ear straps so they can be unscrewed off the buzzer bars and stored safely
Dimensions:Min Extension/Length = 925mmMax Extension/Length = 1500mmMinimum Height = 245mm*Maximum Height = 380mm**Height taken at the centre of the pod due to the front and back legs being unequal lengths.
Fox Platform S Pegs 15per Pack
Perfect for pegging your shelter down when fishing on wooden platforms .
Ergonomic handles
Hardwearing steel point and thread
15 in a packet
Fox Horizon Pod Extension Legs 36"
These Pod Extension Legs are at 36'' and are made from a strong yet lightweight material.
Designed to extend the front of the duo pod to reach over marginal snags and weed.
Designed for use with Foxs Horizon Duo Pod these 36'' legs are ideal for extending the front of your pod up so the tips of your rods are high in the air keeping your line away from marginal weed an snags.
Also great for river fishing and extreme range on big lakes.Product Features
Strong
Lightweight
Black anodised finish
Sold as pairs
Fox Edges Heavy Duty O Ring
The perfect O ring to create chod/ helicopter lead release systems. Finished in a non reflective matt black coating.
Perfect O ring to create chod/ helicopter lead release systems
Ultra strong
Non reflective matt black coating
15 per pack
Fox Edges Kwick Change Pop-Up Dispenser
Kwik Change Weights provide the angler with a multitude of balancing and weighting options. Available in four popular, practical sizes to cover a variety of uses.
The weights are attached simply by stretching a piece of the rubber tube and placing into the slot. This forms a totally secure fixture that will not damage the line.
Attached simply by stretching a piece of the rubber tube and placing into the slot
Totally secure fixture that will not damage the line
Easy to change
Can be placed on the hooklink material or even hook
Dispenser easy to use
Fox Edges Drill & Cork Set
The Tigernut Drill features a unique point shape which has been specifically chosen to make the drilling of hard baits such as tiger nuts, quick and easy.
The cork plugs are exactly the same diameter as the drill shaft enabling the drilled hole to be filled with a perfectly fitting cork insert.
Using this system allows baits such as tigernuts and brazils to be made buoyant or semi buoyant whilst keeping the cork invisible inside the hook bait.
Ideal for balancing or popping up hookbaits
Unique point shape to drill hard baits such as tiger nuts, quick and easy
Drilled hole to be filled with a perfectly fitting cork insert
Makes baits buoyant or semi buoyant whilst keeping the cork invisible inside the hook bait
Product Overview
Low profile carryall that can be stored under your bedchair
Designed to work in conjunction with Transporter Barrows – retaining panel on rear allows carryall to be fixed to front bar of Transporter Barrows
Two external side storage pockets, ideal for accessories such as PVA etc
Zipped mesh storage pockets on outside side pockets
Top pocket designed for storage of large Fox tackle box
Main compartment perfect for storing host of tackle items including smaller Camolite Accessory Bags
Reinforced base
Padded camo polyester grab handles
Removable camo padded shoulder strap
High quality heavy duty double zips
Styled in unique Fox Camo pattern
Dimensions: 54 x 29 x 26cm
Hardwearing and water resistant 500D treated polyester fabric
Fabric: Outer 100% Polyester, Lining 100% Polyester, Filling 50% Polyethylene & 50% Polyurethane
We took one of the best bivvies on the market, the Frontier and made it even better. Frontier II keeps everything that worked before and brings new enhanced performance, smarter features, and greater convenience across the board. Available in Green or Camo and three sizes; Frontier II, Frontier II X, and Frontier II XL, this next-generation bivvy delivers serious upgrades in usability, protection, and setup speed.
What’s new:
The ETS BOSS (Easy Tension System) is now a geared system that prevents frame collapse during setup and makes erection smoother than ever. A refined release trigger on the ETS block streamlines breakdown and storage. We’ve fitted new sprung-loaded, keyed elbow joints with ergonomic grips ensure a faster setup.
We have widened the front door for better visibility and access, added mozzy vents either side of the front door on all models and included a Zip-in Groundsheet for easier attachment, complete protection, and direct connection to the optional Inner Mesh Shield (X & XL models only).
Now all models feature four all-weather vents per model, all accessible from inside with camo mozzy mesh and pegging options to maintain airflow in rain. We’ve added storage points with two extra hanging hooks by the door complement the four mesh pockets and central hook.
A new quick-release cam system has been fitted to the supplied Heavy Duty Storm Pole.
The Vapour Peak now comes supplied as standard with every model, no need to buy separately.
All three bivvy sizes launch with a full suite of optional extras, including: Camo Mozzy Mesh Front Panel (now with letterbox-style door), Deluxe Wrap – Extends coverage by 60cm, fits two bedchairs converting Bivvy into 2 person shelter, and features aligned vents, storm pole points, and easy Velcro + D-Loop attachment. Deluxe Extension – 1.5m extension at the front now with full bivvy coverage for twin-skin insulation and reduced condensation. Four removable rear panels convert it into a cap when needed. And The Inner Mesh Shield (for X and XL)
Other features include:
Constructed from 100% Polyester khaki VenTec fabric with blackout laminate lining, 20,000mm hydrostatic head.
Lightweight aluminium frame with high, flat back design for maximum headroom and usable internal space.
Groundsheet features unique door entry flap
Solid infill panel with three door options: solid, clear, and camo mozzy mesh, plus mesh panels on both door sides.
Four internal mesh pockets for safe storage
Supplied with double-zipped carry bag, storm cord eyelets with cords stored in peg bag.
Dims: 260 x 198 x 140cm.
Weight: 19kg.
Folded dims: 23cm x 23cm x 155cm.
Packaged dims: 25cm x 25cm x 157cm.
Packed weight: 20kg.
Frontier II - X Deluxe WrapThe Deluxe Wrap extends your bivvy by 60cm, offering extra protection and space to fit two bedchairs when combined with the front panel. It converts into a full wrap by removing the bivvy front and zipping directly to the wrap. Four double-zipped vents align with the bivvy’s for optimal airflow, while storm pole attachments on the extending ribs add stability. Easy to fit using the Velcro strap and D-Loop system for quick, secure setup. Available in both Green and Camo
100% Polyester.
Weight: 5.70kg.
Folded dims: 16cm x 16cm x 82cm.
Packed dims: 18cm x 18cm x 84cm.
Packed weight: 6.2kg.
Supplied with a groundsheet extension
Frontier II - X Deluxe ExtensionThe Deluxe Extension adds 1.5m of extra space, creating a shaded front area and a full twin-skin wrap for better insulation and reduced condensation. The rear now fully covers the bivvy, while all four rear panels can be removed to switch between full or cap-style coverage. Side and front panels are fully removable or swappable with mozzy mesh options. Comes with a heavy-duty groundsheet and attaches via Velcro strap and D-Loop system for quick, secure setup.
100% Polyester.
Dims: 150 x 260 x 155cm.
Weight: 13.74kg.
Folded dims :125cm x 20cm x 20cm.
Packaged dims :127cm x 22cm x 22cm.
Packed weight: 14.74kg.
Frontier II - X Camo Mozzy MeshFull zip in Camo Mozzy Mesh Panel now features 2 way double zip to allow “letter box” style opening. Compatible with the Deluxe Wrap
Weight: 1.04kg.
Folded dims: 17cm x 8cm x 34cm.
Packaged dims: 18cm x 9cm x 35cm.
Packed weight :1.3kg.
Frontier II- X Inner Mesh ShieldThe Internal Mesh Shield toggles into place inside the bivvy, offering added insect protection without the need for a separate groundsheet — it now simply zips directly to the main groundsheet, reducing bulk and weight. It includes a double-zipped front door, two internal mesh pockets, and a central hanging loop for added convenience. Four mesh windows allow airflow and provide internal access to the bivvy’s main mozzy vents.
Weight: 1.3kg.
Folded dims: 11cm x 11cm x 48cm.
Packed dims: 12cm x 12cm x 49cm.
Packed weight: 1.6kg.
Tied using Edges 50lb Camo Leadcore
3 x 75cm lengths
Spliced loop on one end for easy main line attachment and a Speed Link at the other for lead attachment
All three leaders have Edges Trans Khaki rig components set up in place creating the ideal helicopter presentation
Supplied with: 3 x Heli Buffer Sleeves, 3 x Tapered Bore Beads, 3 x 0.5mm Leader Silicone, 3 x Size 7 Heli Swivel, 3 x Micro Speed Links and 3 x Micro Anti Tangle Sleeves