Bivvies

Trakker SLX V3 Bivvy Extended Wrap SLX 100 WrapTransform the SLX V3 into a triple skin shelter to offer the ultimate in warmth and comfort during the colder months, further reducing condensation and increasing heat retention. Manufactured from our upgraded 10,000mm Hydrostatic Head Polyester, the SLX V3 Bivvy Wrap creates a small porch area at the front of your bivvy to allow for greater space inside the bivvy, it also features a zipped rear vent for increased ventilation and dual-zipped doors which allow you to create a letterbox opening.Product Features. Transformes SLX V3 in to a triple skin shelter for ultimate warmth and comfort Reduces condensation and increases heat retention Zipped rear vent for increased ventilation Creates a small porch area in front of bivvy Dual-zipped doors allowing you to create a letterbox opening Tie-backs for door and side panels Dual rod straps Supplied with carrybag and T-pegs Upgraded 10,000mm Hydrostatic Head fabric 
Technical Specifications.Material: polyesterWeight: Approx 3.55kg (plus pegs weighing 0.9kg)Dimensions: Approx 130H x 265D x 300W cmTransport size: 50 x 32cmSLX 150 WrapTransform the SLX V3 into a triple skin shelter to offer the ultimate in warmth and comfort during the colder months, further reducing condensation and increasing heat retention. Manufactured from our upgraded 10,000mm Hydrostatic Head Polyester, the SLX V3 Bivvy Wrap creates a small porch area at the front of your bivvy to allow for greater space inside the bivvy, it also features a zipped rear vent for increased ventilation and dual-zipped doors which allow you to create a letterbox opening.Product Features. Transformes SLX V3 in to a triple skin shelter for ultimate warmth and comfort Reduces condensation and increases heat retention Zipped rear vent for increased ventilation Creates a small porch area in front of bivvy Dual-zipped doors allowing you to create a letterbox opening Tie-backs for door and side panels Dual rod straps Supplied with carrybag and T-pegs Upgraded 10,000mm Hydrostatic Head fabric Technical Specifications.Material: polyesterWeight: Approx 3.8kg (plus pegs weighing 0.9kg)Dimensions: Approx 150H x 305D x 320W cmTransport size: 55 x 35cm

Read more less

Trakker Tempest 200 Skull Cap The Trakker Tempest 200 Skull Cap creates a peak to the front of the Tempest 200, which gives greater protection from the rain without compromising the view of the lake. Not only will the Skull Cap give additional protection from the weather, it also adds a second skin to the top of the shelter to combat condensation and retain heat, and unlike a full overwrap, it can be left in place when the bivvy is packed down. Specifically designed for the Tempest 200 Designed to give the Tempest 200 a peak Reduces condensation, increases shade Can be left in place during set-up and pack-down Clips are easy to fit and can be left in place Rain gutter Dual rod straps Draw string carry bag Compatible with 201547 Tempest 200 (available separately)  TECHNICAL SPECIFICATIONMaterial: 210DWeight: Approx 1.4kgTransport size: Approx 45 x 18 x 18cm

Read more less

Trakker Tempest 200 Shelter The biggest Tempest to date! The Tempest 200 offers two-bed capacity with optimum storage space for the long-session specialists, where additional space for comfort is required, and due to the patented quick-erect design that the entire Tempest range follows, is ideal for any length of session. Not only is the Tempest spacious enough for two beds, it also has a height of 170cm for the taller anglers, and can be fitted with an inner capsule to maximize comfort year-round. Revolutionary patented design Ultra-Strong, easy to use and ultra-quick to assemble Machined Aluminium block – Super strong and fatigue resistant 200 size designed for two beds and two anglers with optimum storage Twin vents at the rear Dual rod straps Anti-twist pole system Supplied with tension strap, carry bag and T pegs Compatible with 201548 Skull Cap (available separately)  TECHNICAL SPECIFICATION Material: 210D Fabric – waterproof and durable  Weight: Approx 13.5kg (plus pegs and groundsheet weighing 4.5kg)Dimensions: Approx 170H x 310D x 170W cmTransport size: 165 x 35cm

Read more less

Aqua Fast and Light DPM Camo Brolly Manufactured from performance grade Aquatexx®, our DPM Fast and Light Brolly is a contemporary alternative to that of the original model. Home to the same array of features, from its light and compact design to its space-saving frame, this tried and tested brolly is the ideal solution for the modern-day, discerning carp angler. Equivalent to our original, best-selling Fast and Light Brolly, the DPM camo variant houses the same functionalities with a contemporary twist thrown into the mix. The light and compact design allows for fitting with ease when it comes to quiver systems, with further space saved when used in conjunction with a barrow. Additionally, the 9th rib, coupled with our 55” framed brolly, gives an increased level of coverage for the mobile angler. This allows for an unhindered view of the surrounding wilderness. Compatible with the Aqua Camo Fast & Light Wrap, this shelter requires additional Quicksticks that can be purchased separately, with both 24” and 48” variants available, dependent on the stability you desire. Popular amongst the modern-day, discerning carp angler, disruptive pattern material, better known as DPM, is a camouflage design adopted from the British Armed Forces. As angling is predominantly carried out within a woodland environment, it seemed appropriate to introduce an array of storage solutions that play into the surroundings, that coming in the form of our DPM Luggage Range. Key Features: Space-saving frame.
 9th rib system.
 Extended storm-sides.
 Machined, aluminium bell-cap with tie-down ring.
 Rod retaining straps.
 Complete with Aqua Peg Set.
 Comes complete with a lightweight Aqua storage sleeve.
 Technical Specifications:Material: Performance grade Aquatexx in DPM camo
Weight: 5.2kg - an additional 1.6kg with sleeves and pegs
 Dimensions:1350mm (H) x 2480mm (W) x 1850mm (D)


Read more less

Nash Titan Hide Camo Pro Waterproof Infill*

Read more less

Aqua M4 Bivvy 100 The original pram-hood-style carp fishing shelter is back and better than ever before in the form of our Aqua M4 100. Based on the original Mk1 Armo Heritage this premium fishing shelter now boasts fully Adaptable Ventilation, with a huge rear vent to help keep the shelter cool, the vent cover can be pegged out to prevent water ingress whilst still allowing air to flow freely through the shelter. Fashioned from performance grade Aquatexx this premium fabric offers breathability to reduce condensation build up and offers industry leading 25,000mm hydrostatic head water proofing, making it the ideal all-weather solution wherever your adventures may take you. Key Features 3-rib system for unrivalled stability Removable peak for increased customisation Fully adaptable and removable infill panel Huge rear vent, including Adaptive Ventilation Aquatexx® heavy-duty material offers 25,000HH Mozzi door and window panels 2-break pole system for compact storage Precision moulded interlocking frame support Heavy-duty groundsheet, clear window and pegs supplied Size: 140cm (h) x 275cm (w) x 225cm (d) Transportation size: 110cm x 23cm Weight: 14.1kg (M4 inc. Infill weighs 9.1kg / Groundsheet weighs 2.1kg / Pegs bag/frame support etc 2.9kg) Material: Aquatexx 25000mm Hydrostatic Head 150 The original pram-hood-style carp fishing shelter is back and better than ever before in the form of our Aqua M4 150 . Based on the original Mk1 Armo Heritage this premium fishing shelter now boasts fully Adaptable Ventilation, with a huge rear vent to help keep the shelter cool, the vent cover can be pegged out to prevent water ingress whilst still allowing air to flow freely through the shelter. Fashioned from performance grade Aquatexx this premium fabric offers breathability to reduce condensation build up and offers industry leading 25,000mm hydrostatic head water proofing, making it the ideal all-weather solution wherever your adventures may take you. Key Features 3-rib system for unrivalled stability Removable peak for increased customisation Fully adaptable and removable infill panel Huge rear vent, including Adaptive Ventilation Aquatexx® heavy-duty material offers 25,000HH Mozzi door and window panels 2-break pole system for compact storage Precision moulded interlocking frame support Heavy-duty groundsheet, clear window and pegs supplied Size: 150cm (h) x 310cm (w) x 245cm (d) Transportation size: 110cm x 23cm Weight: 16.55kg (M4 inc. Infill weighs 11.0kg / Groundsheet weighs 2.6kg / Pegs bag/frame support etc 3.05kg) Material: Aquatexx 25000mm Hydrostatic Head

Read more less

Trakker Tempest RS 200 Bivvy The quickest, "easy-erect" shelter just got even better with the introduction of the phenomenal Tempest Rapid Shelter. At the core of the bivvy is the renowned patented hinge block, allowing for ease and speed of set-up. The set-up time, usability and functionality have all been enhanced even further with the Rapid Knuckle System, enabling all five main poles to lock into position in one effortless action. Simple and secure, erecting your shelter has never been easier. Additional Rapid Shelter enhancements include a built-in peak to minimise water ingress in and around the door and this peak can be increased even further to allow even more coverage with the addition of a Skull Cap. The rear of the shelter has been made flatter than its predecessor, striking an optimal balance between internal storage space, the ability to fit into swims and aerodynamics. Airflow through the shelter has been improved with Adaptive Ventilation on six vents (four on the rear and two on the front), facilitating air flow even when it is raining. To help stay cooler in the hight of summer, the four rear vents can be pegged out to create areas of shade, which, when used in partnership with a Skull Cap, can reduce the internal temperature by several degrees. For optimal storage, there are four internal pockets, two on each side and two at the front. Those at the front have a hanging loop where you can store essentials such as your receiver or even your jacket for a speedy exit in inclement weather conditions. Material: Aquatexx Hydrostatic Head Rating: 25000mm HH Weight: 13.8kg (plus pegs, Quick Sticks, and carry bag weighing 6.4kg) Total weight: 20.2kg Dimensions: 170cm (H) x 380cm (W) x 290cm (D) Transport Size: 163cm (L) x 25cm Compatible with: (201434) Tempest RS 200 Insect Panel, (201432) Tempest RS 200 Skull Cap, (201431) Tempest RS 200 Social Cap, (201436) Tempest RS 200 Inner Capsule, (203205) Cool Guys. The original, industry-leading, quick-erect shelter Advanced GRP composite block: lightweight, super-strong and fatigue-resistant Rapid Knuckle System allows easy assembly and includes built-in Skull Cap mounts Enhanced Aquatexx fabric; multi-layer breathable system with superior 25000hh water repellency and black-out pigment to reduce light and heat ingress Adaptive Ventilation to reduce condensation and lower temperatures Vent covers can be pegged out with Cool Guys (available separately) to maximise airflow and increase shade Peak minimises water ingress in and around the door area Black textured powder-coated anti-twist poles Flatter back for optimised storage Tall design offers increased headroom Two magnetic rod straps Four internal mesh storage pockets Two internal hanging points Supplied with an oversized heavy-duty NXG carry bag, groundsheet, tension strap, clear window, two Quicksticks and T-pegs

Read more less

Trakker Tempest RS Brolly Groundsheet The Tempest RS Brolly Groundsheet is specifically designed for use with the Tempest RS Brolly, with corresponding pegging rings and clips, ensuring the best possible fit. Ideal for keeping luggage, your bed and other belongings from becoming soiled when placed on wet or muddy ground. Material: Polyethylene fabric Weight: 2.05kg Transport Size: 5cm (H) x 25cm (W) x 56cm (D) Compatible with: (200701) Tempest RS Brolly Elastic and ring pegging system Webbing finishing around the edge prevents fraying Logo tag to indicate door position Supplied with Aquatexx drawstring bag

Read more less

Trakker Tempest RS Brolly Full Infill Panel Designed to transform your Tempest RS Brolly into a fully fronted shelter to offer even greater protection against the elements in adverse weather conditions. The Tempest RS Brolly Infill simply zips into the front in seconds and features dual-zipped doors, allowing you to create a letter box opening in addition to the conventional door style. The vents on either side of the door feature adaptive ventilation for maximum airflow around your shelter. It can be easily packed away thanks to its lightweight and compact design. Material: Aquatexx Hydrostatic Head Rating: 25000mm HH Weight: 2.05kg Transport Size: 41cm (H) x 10cm (W) x 22cm (D) Compatible with: (200701) Tempest RS Brolly Full zip-in infill panel specifically designed for Tempest RS Brolly Enhanced Aquatexx fabric; multi-layer breathable system with superior water repellency and black-out pigment to reduce light and heat ingress Adaptive Ventilation® to reduce condensation and temperature inside the shelter Dual-zipped door allowing you to create a letter box opening Tie-backs for door and side vents Roll-up mozzie window in door Supplied with a clear window, T-pegs and Aquatexx carry bag

Read more less

Trakker Tempest RS Brolly Skull Cap Adding a Skull Cap to your Tempest RS shelter greatly enhances its performance. It adds additional length to the peak, providing more coverage in and around the door area. It also creates shade, greatly cooling your shelter in the warmest months. The dual-layer coverage improves insulation, greatly reducing the chance of condensation. Manufactured from enhanced Aquatexx, this multi-layer fabric offers superior water repellency, breathability, and black-out pigment. The RS version features improved guttering and two magnetic rod straps. Material: Aquatexx Hydrostatic Head Rating: 25000mm HH Weight: 1.00kg Transport Size: 12cm (H) x 12cm (W) x 30cm (D) Compatible with: Tempest RS Brolly (200701) Creates an extended peak to offer additional protection from the elements Increases shade and keeps you cooler in the summer months Twin-skin reduces condensation by creating a cavity Rain gutter directs water out to the sides of the shelter Easy to fit; no additional clips or pegs are required Dual magnetic rod straps Enhanced Aquatexx fabric; multi-layer breathable system with superior water repellency and black-out pigment to reduce light and heat ingress Supplied with Aquatexx drawstring bag

Read more less

Trakker Tempest RS Brolly The quickest, "easy-erect" shelter just got even better with the introduction of the phenomenal Tempest Rapid Shelter. At the core of the bivvy is the renowned patented hinge block, allowing for ease and speed of set-up. The set-up time, usability and functionality have all been enhanced even further with the Rapid Knuckle System, enabling all five main poles to lock into position in one effortless action. Simple and secure, erecting your shelter has never been easier. Additional Rapid Shelter enhancements include a built-in peak to minimise water ingress in and around the door and this peak can be increased even further to allow even more coverage with the addition of a Skull Cap. The rear of the shelter has been made flatter than its predecessor, striking an optimal balance between internal storage space, the ability to fit into swims and aerodynamics. Airflow through the shelter has been improved with Adaptive Ventilation on six vents (four on the rear and two on the front), facilitating air flow even when it is raining. To help stay cooler in the hight of summer, the four rear vents can be pegged out to create areas of shade, which, when used in partnership with a Skull Cap, can reduce the internal temperature by several degrees. For optimal storage, there are four internal pockets, two on each side and two at the front. Those at the front have a hanging loop where you can store essentials such as your receiver or even your jacket for a speedy exit in inclement weather conditions. Material: Aquatexx Hydrostatic Head Rating: 25000mm HH Weight: 7.45kg (plus pegs, Quick Sticks, and carry bag weighing 2.8kg) Total weight: 10.45kg Dimensions: 140cm (H) x 250cm (W) x 210cm (D) Transport Size: 126cm (L) x 22cm Ø Compatible with: (200704) Brolly Infill, (201639) Tempest RS Brolly Groundsheet, (200703) Brolly Mozzie Infill, (200702) Brolly Skull Cap, (200705) Tempest RS Brolly Social Cap, (203205) Cool Guys.

Read more less

Fox EOS Bivvy Skin 1 Man Designed to allow the user to create a twin skin on their EOS 1-Person bivvy Increases warmth in the winter and helps to keep you cooler in the summer Vastly aids the reduction of condensation Creates additional storage space for items such as waders, bait etc. 8000mm hydrostatic head Weight – 1.8kg 2 Man Designed to allow the user to create a twin skin on their EOS 2-Person bivvy Increases warmth in the winter and helps to keep you cooler in the summer Vastly aids the reduction of condensation Creates additional storage space for items such as waders, bait etc. 8000mm hydrostatic head WEIGHT – 2.3kg

Read more less