Fox Rod Lok
New take on a classic Fox product. Steel skeletal frame over moulded in plastic and soft touch rubber. Designed to tightly grip the butt of the rod.
New take on a classic Fox product
Steel skeletal frame over moulded in plastic and soft touch rubber
Designed to tightly grip the butt of the rod
Medium suited to abbreviated handles, Large ideal for Slim Cork and Slim Duplon handles
Fox Black Label Snag Ears
Aside from looking the part these Snag Ears also have a very practical use in that they prevent your rod from coming off of your bite alarm when fishing ‘locked up’. They have been designed to work with most bite alarms (especially our N and M series of Microns!) and have a rubber over mould on the top half to protect the blank of your rod when it comes into contact with it.
Hockey stick built into snag ear plate for easy alarm and indicator alignment
Designed for Black Label indicators to be screwed onto
Ears can be unscrewed to protect them in transit or when they are not needed
Rubber over moulds on the top half are designed to offer protection to your rod
Designed to work with most bite alarms, especially our N and M series of Microns!
Packaging made from 100% recycled cardboard
Fox Micron RX+ Presentation Sets
Weatherproof sealed case
Digital circuitry
D-Tec Plus Sensing System (DTSS)
Drop back differential
Low battery drain
CNC machined Tru-Run roller wheel
Twin multi-colour LEDs (Red, Green, Blue, Orange, Purple & White)
On / Off toggle switch with 2 operational modes (day and night mode)
When in night mode both LEDs will subtly glow in your chosen colour
High quality cone speaker
Rigid 3/8” stainless steel thread
Rod-friendly rubber inlays
Indexed ergonomic control for volume (8 different levels of volume with lowest setting being completely silent)
Indexed ergonomic control for tone (8 different tone settings: turn dial clockwise to raise pitch and anti-clockwise to lower pitch)
Indexed ergonomic control for Intelligent Sensitivity featuring See-Saw elimination (8 different sensitivity settings – see below Sensitivity table for comparison to NTX-R)
Range test function allows user to check RX+ Receiver is picking up RX+ head at any given range
Low battery warning (LED colour changes to cyan indicating it is time to replace batteries)
Power Out Socket (2.5mm) for use with illuminated Swingers
Supplied with two compression washer options: rigid and soft with an additional spare soft washer per unit
Requires 2 x AA batteries
RX+ Receiver, 2-rod, 3-rod and 4-rod presentation sets available separately
Improved features compared to NTX-R
Deeper ears with no increase in the height of the alarm
Twin multi-colour LEDs, one per ear and at the very top of the ear
External control of the multi-colour LEDs with Colour Sync™ function – simply change LED colour via button on the battery cover
Manually selectable day and night modes
External control of the Vari-Bright adjustable LED brightness to suit the conditions you are fishing in (choice of 3 LED brightness settings in day mode and 3 different brightness settings in night mode) simply adjust via button on battery cover
Larger clearance around the roller wheel and improved drainage vastly reduces chances of roller wheel freezing up in extreme cold conditions
Stronger range performance with RX+ Receiver
Improved sensitivity range (see below)
Sensitivity ControlIn all sensitivity settings (except maximum), the line must travel the specified distance in the same direction and within 2 seconds in order to trigger the unit. Any movement in the opposite direction will reset the distance counter to zero. This can substantially reduce, or eliminate false triggering caused by wind and water movement. Line Movement RX+ Line Movement NTX-RSetting 1 (Min) 90mm 74mmSetting 2 73mm 56mmSetting 3 56mm 48mmSetting 4 34mm 40mmSetting 5 17mm 32mmSetting 6 11mm 24mmSetting 7 5.6mm 16mmSetting 8 (Max) 2.8mm 8mm
Matrix Hot Head Isotopes
Premium, ultra-bright, long-life isotopes custom built to fit our indicator heads (and many others). Essential for any night angler.
Product Features
Ultra-bright
Long-life
Perfect for fishing at night
Might fit other indicator heads
These are 23mm long and 3mm diameter
Matrix Dinky Hot Head Isotope
Premium, ultra-bright, long-life isotopes custom built to fit our indicator heads (and many others).
Essential for any night angler.
Product Features
Ultra-bright
Long-life
Perfect for fishing at night
Might fit other indicator heads
These are 15mm long and 3mm diameter
Matrix Black Chain
Stainless steel black chain with standard plastic screw thread to attach to your hockey stick and bobbin.
Product Features
Stainless steel chain
Wont rust over time
Standard thread
Korda Stow Bar
The Stow Bars are designed for when snag fishing with locked up clutches, or in other situations where you have a tight drag and your rod tip isn’t pointing at your rig, as it will stop your rod getting dragged off of your bite alarm.
The Stow Bars are incredibly strong and are made from lightweight aluminium – in a choice of silver or black versions – and feature a bracket which fits under your bite alarm and can be left in place even when the bars aren’t being used.
The Stow Bars are easily fitted to this bracket via a screw thread and the gap between them can be adjusted to suit the diameter of your rod blank.
As well as being used as a pair, a single bar can also be used if that suits the angling situation better.
The bars have a very smooth, rounded finish, so there is no way that your line can get caught on them as you lift the rod up.
Each pack contains one set of Stow Bars.Key features
Ideal for snag fishing
Prevents your rod getting dragged off of the buzzer
Strong and adjustable
Black or silver versions
Delkim Digital V2 Presentation Set (Changeable LEDs) New
TXI-D V2
Vibration Response: Controls the ability of the alarm to sense line movement and vibrations.
Beep Speed: Helps maintain the best speed relationship as you adjust the response.
Mute: Mutes the Txi-D v2 speaker.
Multi-Coloured LEDs: Allows for customised LED colour settings.
8 LED Brightness Levels: Adjustable brightness for different lighting conditions.
Day/Night Mode: Allows LED brightness to be set for either day or night conditions.
Night Marking: LEDs glow at a low level constantly in night mode.
32 Tones: Various tones can be selected for different alerts.
Stealth Mode: Deactivates Txi-D v2 LEDs during activation but keeps night marking active.
Advanced Anti-Theft Security: Sends an alert to the Rx-D v2 when the alarm is turned off or moved.
Compatible with original Rx-D receiver.
RX-D V2
Auto Sync Multi-Coloured LEDs: Automatically syncs with the colour set on the Txi-D v2 alarm.
Easy Pairing: Comes paired to the Txi-D v2 alarms and can pair with up to 12 alarms.
Bivvy Light Mode: All LEDs illuminate white to provide emergency illumination when triggered by the Txi-D v2.
Quick Torch: Can light all LEDs to give an emergency torch option.
DND (Do Not Disturb): Prevents the Rx-D v2 from being triggered by heavy showers or hailstones.
Recall: Last channel activated by a Txi-D v2 will illuminate.
Vibro: Will vibrate when activation from the Txi-D v2 is received and can be adjusted.
Anti-Theft Security Alarm: Security alarm will sound when triggered by the Txi-D v2.
Low Battery Check: Tests the battery condition and provides a warning if it is low.
Battery Level Monitor: LEDs light up to show the battery level.
Auto Switch Off: Switches off automatically if no activity is detected from a paired Txi-D v2 within approximately 60 hours.
PB Failsafe Abort: Automatically switches off if push buttons become held down continuously by accident.
Only compatible with Txi-D v2 alarm
Solar P1 Centre-Loc Adjustable Back Rest The unique, P1 Center-Loc Adjustable Back Rest is the ultimate back rest.
A world-first in design, the width of the arms on this back rest can be adjusted to perfectly suit any rod butt (from thin carbon blanks to full cork and Duplon handles) via an adjustment system cleverly housed inside the central screw thread.
Simply loosen the bolt inside the screw thread using the supplied allan key, set the back rest to the size you need and then lock the arms in place by tightening the bolt.
The result is a versatile, streamlined back rest that will provide a lifetime of service.
The Flexi-Grip arms are designed with a small amount of inherent flex and feature rubberised grips for a secure grip on any rod butt.
The precision-machined, 5-Spoke Diamond-Grip body matches the rest of the P1 range and the 3/8″ BSF screw fitting means that these are universally compatible; they will fit with almost all banksticks and buzz bars.
Made in the UK entirely from top quality stainless steel.
2 sizes available (mini & standard)
A World-First design
The width can be adjusted to suit any rod butt
Precision engineered and CAD designed
Made in England, as always
Made from the highest quality stainless steel components
JAG Safe liner Inserts
Safe liner inserts available in 8 different colours. Sold in packs of three matching colours.
Designed for the safe liner indicator
Line friendly
3 per pack
Matrix Aero-Clip
These clips (that weigh in at less than a gram) have been designed as a slack line clip, they can be fished free running or fixed in position, we have moulded a tiny recess half way up the clip head so that the line locates centrally.
Product Features
Perfect for slack lining
Free running or fix the line in place
Adjustable tension
2 per pack
