Solar P1 Fixed Buzz Bar
2 and 3 rod, fixed Buzzer bars made from solid stainless steel bar.
These feature the P1 5-Spoke knurled collars and our original Pozi-Loc, perfect-alignment system, which enables perfect alignment of any buzzer or back rest.
Compatible with the P1 Worldwide Pod, P1 Sod Pod and all P1 Banksticks
Korda Singlez Stage Stands
This revolutionary rod support system is the brain-child of Korda boss Danny Fairbrass, and was designed in line with his vision and then produced for us in stainless steel by top engineering firm, JAG Products.
It can be used in any type of ground or even on platforms, and two rod and three rod versions are available, with a whole host of different ways of setting them up, thanks to different length uprights and buzz bars, plus you can even turn it into single banksticks if you want to.
The Singlez has literally turned rod support systems upside down, as the buzz bar is at the bottom resting on the ground, thus providing far more stability and allowing it to be pushed into the ground with your feet, and the uprights are screwed into that, providing perfect spacing and ensuring they are all straight – it looks like a multi-rod, single bankstick set-up, but without all the hassle!
Each set of uprights features a spike at the bottom – there is also a Spike Extension to make it longer for use on types of bank where it needs to be pushed further into the ground - that can be pushed into almost any type of ground using your body weight on the bars, and the addition of a Spike Ball Stabiliser provides extra stability.
If you are fishing on platforms, Stage Stands are available and are sold in pairs.
Singlez are so versatile that you could even fish them as single banksticks if you wished to, with the addition of spikes screwed into the uprights.
A T-Bar is also available, which you can screw a spike onto in order to create a hole to push your Singlez set-up into – if you’d rather not stand on the Buzz Bars to do this – and that comes with a carabiner clip so that it can double up as a weigh bar for your scales, plus means it can be clipped onto your luggage when not in use so there is no chance of it being mislaid.
Key features
Rod rest system
Designed by Danny Fairbrass
Engineered by JAG Products
Top quality stainless steel
Wide range of different options
Stage stands provide the perfect solution for a stable bank stick set up when fishing on wooden platforms.
ESP stage stands are supplied in pairs of 4 and 6 inch long which extend to 5 ¼ inch and 9 inch.
The different lengths can be located front or back to allow for various angling situations such as a ‘tips up’ or ‘tips down’ set up.
The construction is the same as the highly successful ESP banksticks launched last year, with a hard anodized aluminium outer and solid carbon inner with a securely locking captive thumb screw.
But instead of a point they have a wide diameter stainless foot plate which provides excellent surface contact and grip.
Secured in place with the wood screws and screwdriver supplied, these stage stands create a rock-solid set up on wooden platforms and jetty’s.
Matrix Blackout Adjustable Buzz Bar
A lightweight but very strong and durable Black Aluminium range, made from a chunky 16mm tube to give the ultimate in stability.
Product Features
Lightweight
Extremely strong
Ultimate in stability
Key Features
New and improved Butt Loks feature a hard plastic skeleton with a soft by hardwearing rubber over mould
When sized correctly to the rod, these lock in securely the butt of your rod
Available in 3 standard sizes (Small, Medium and Large) to suit full duplon/cork and from the thinnest 10ft blanks through to the most powerful 13ft blanks in Abbreviated or shrink wrap handles
The Duo model is for the angler that swaps between full cork/duplon to abbreviated or full shrink wrap handles
Supplied with a rubber O-ring for precision alignment on your buzz bars
Trakker Butt Grabber
Securely grip your rods through the most savage of takes
Minimalist design
Two sizes cater for abbreviated (small) and full duplon/cork handles (large)
TECHNICAL SPECIFICATION:
Dimensions: 2.5 (H) cm (not including thread)
Weight: Approx 4g
Material: Plastic
Trakker 20/20 Adj Swan Neck Buzz Bar 3 Rod
Manufactured from matt-black anodised aluminium, they offer the renowned 20/20 strength for the most demanding conditions, and come in a sleek, stylish design that all Trakker 20/20 products are synonymous with.
These fully adjustable curved buzz bars feature a machined flat section on the underside of the extending bars to eliminate twist.
PRODUCT FEATURES:
Adjustable 20/20 range styled with cult appeal
Anodised matt black aluminium finish
Machined fillet to the underside of the insert prevents bar twist
Subtle branding on thumbscrews
TECHNICAL SPECIFICATION:
Dimensions: Approx 12.7-19cm / 15.2-21.6cm
Weight: Approx 156g / 160g
Material: Aluminium
Fox Horizon Pod Extension Legs 36"
These Pod Extension Legs are at 36'' and are made from a strong yet lightweight material.
Designed to extend the front of the duo pod to reach over marginal snags and weed.
Designed for use with Foxs Horizon Duo Pod these 36'' legs are ideal for extending the front of your pod up so the tips of your rods are high in the air keeping your line away from marginal weed an snags.
Also great for river fishing and extreme range on big lakes.Product Features
Strong
Lightweight
Black anodised finish
Sold as pairs
Fox Horizon Duo Pod
The new Horizon Duo Pod bears little resemblance to the original Horizon Pod and is now more like a bigger twin rail version of our Stalker Pod.
Twin rail design for extra stability
Four leg position angles (allowing for rod tips to be pointing towards sky for long range fishing)
New Double Cam levers
2 x Karabiner mounting points to tie/weigh down the pod
All brass thread fittings (no oxidisation)
New rubber ‘bumper’ on ‘head’ moulding to protect your swinger head once it detaches from line and hits pod
Standard leg lengths 33cm & 25cm
3-rod and 4-rod versions available
Carry case as standard - Incorporating; A full length zip + built in storage for additional XL legs. Carry case also has snag ear straps so they can be unscrewed off the buzzer bars and stored safely
Dimensions:Min Extension/Length = 925mmMax Extension/Length = 1500mmMinimum Height = 245mm*Maximum Height = 380mm**Height taken at the centre of the pod due to the front and back legs being unequal lengths.
Korda Singlez T Bar Aluminium
This revolutionary rod support system is the brain-child of Korda boss Danny Fairbrass, and was designed in line with his vision and then produced for us in stainless steel by top engineering firm, JAG Products.
It can be used in any type of ground or even on platforms, and two rod and three rod versions are available, with a whole host of different ways of setting them up, thanks to different length uprights and buzz bars, plus you can even turn it into single banksticks if you want to.
The Singlez has literally turned rod support systems upside down, as the buzz bar is at the bottom resting on the ground, thus providing far more stability and allowing it to be pushed into the ground with your feet, and the uprights are screwed into that, providing perfect spacing and ensuring they are all straight – it looks like a multi-rod, single bankstick set-up, but without all the hassle!
Each set of uprights features a spike at the bottom – there is also a Spike Extension to make it longer for use on types of bank where it needs to be pushed further into the ground - that can be pushed into almost any type of ground using your body weight on the bars, and the addition of a Spike Ball Stabiliser provides extra stability.
If you are fishing on platforms, Stage Stands are available and are sold in pairs.
Singlez are so versatile that you could even fish them as single banksticks if you wished to, with the addition of spikes screwed into the uprights.
A T-Bar is also available, which you can screw a spike onto in order to create a hole to push your Singlez set-up into – if you’d rather not stand on the Buzz Bars to do this – and that comes with a carabiner clip so that it can double up as a weigh bar for your scales, plus means it can be clipped onto your luggage when not in use so there is no chance of it being mislaid.
Key features
Rod rest system
Designed by Danny Fairbrass
Engineered by JAG Products
Top quality stainless steel
Wide range of different options
OMC Elbowz Black Anodised Aluminium (Pair)
The bars that do it ALL!
The idea is simple, an adjustable buzzer bar, with removable fittings, for maximum flexibility and ease of use.
Each pair of bars is manufactured from super-lightweight black anodised aluminium and are supplied with 4 thread caps, which enable you to protect the threads whilst not in use.
Also available in high-grade 316 stainless steel. Click here
The switch between bars and single sticks has never been simpler, the fixings are FULLY-adjustable, removable and also enable you to use this system as a T-Bar or Goal-Post arrangement, front and back.
Available Sizes:
2 Rod Std (8" & 7")
3 Rod Std (11.5" & 9.5")
3 Rod Wide (13.5" & 11.5")
All bars have an outer diameter of 10mm
Premium, black annodised aluminiumAnti-twist, adjustable main barSecure, goal-post buzz bar attachmentSupplied with a pair of 3-rod buzz barsTwo versions available; supplied with 4” and 6” uprights or 6”and 9”uprightsAdjustable heightAnnodised, aluminium blocks sporting Solar logo – Compatible with all A1 Banksticks, and so can be customisedSupplied in a zipped, A1 carry bag with external pocketsWeight: 1.5kg
