Trakker Tackle 20/20 Captive Bankstick
20/20 CV Banksticks feature no-loss thumbscrews and an inner point for harder ground where a thinner diameter can penetrate the ground easier.
PRODUCT FEATURES:
No-loss thumbscrew
Inner point for hard ground
Lightweight, robust and stylish
Matt black anodised aluminium
Subtle branding
16mm diameter
Material: Aluminium
TECHNICAL SPECIFICATION:
Dimensions:
9 Inch - 22-38cm
12 Inch - 30-53cm
15 Inch - 38-66cm
Weight:
9 Inch - 89g
12 Inch - 109g
15 Inch - 136g
Fox EOS 3 Rod Pod
Small reliable rod pod comes supplied with a pair of moulded 3 rod buzz bars with adjustable height and length.
Adjustable length from 69cm to 106cm
Adjustable height 26cm to 41cm
Comes supplied in it’s own carry case
Offers exceptional value for money
Nash Buzz Bar Wide
Durable, no nonsense high strength aluminium buzz bars for stylish rod support and unbeatable simplicity. Matte black finish, supplied with alignment compression rings.
Available in 2 and 3 Rod Wide for custom rod support, and part of a complete hardware range including Stage Stands, Stabiliser and Butt Grips.
Front and rear
2 rod and 3 rod
Trakker Minimal Buzz Bar
The Minimal Buzzer Bars boast all the great characteristics of our 20/20 Range in a slimmer, svelte profile in a matt black finish and Trakker genes. Less, for once, is more.
PRODUCT FEATURES:
Boasts all the great characteristics of our 20/20 Range but in a slimmer profile
Sleek matt black finish
Material: Aluminium
TECHNICAL SPECIFICATION:
Dimensions:
2 Rod 6 Inch - 16.5 (W) cm
2 Rod 6.5 Inch - 18 (W) cm
3 Rod 10.5 Inch - 28.5 (W) cm
3 Rod 11.5 Inch - 31 (W) cm
Weight:
2 Rod 6 Inch - 62g
2 Rod 6.5 Inch - 65g
3 Rod 10.5 Inch - 92g
3 Rod 11.5 Inch - 97g
ESP Fixed Buzz Bars
A unique fixed length design available in two rod 4", 5" and 6" and three rod 8", 10" and 12".
The ESP buzz bars feature stainless inserts for permanently aligning alarms and back rests quickly and easily without the need for locking rings or rubber O rings etc.
Each buzz bar is supplied with a tool for securing the inserts.
Machined from strong solid bar in ESP’s own UK factory with a black hard anodised finish.
Fox Black Label QR Adjustable Buzz Bars
The Black label range of bankware has been re-designed and improved for 2020.
The range now incorporates our Quick Release QR mechanism that makes changing your alarms/buzzbars/pod etc effortless.
The QR system comprises of a QR Pod and a QR base.
The QR pod screws onto your Buzzers, Butt Rests, buzz bars etc and can drop into any QR base on whatever QR buzz bar or bankstick you choose.
Switching from buzzbars to single sticks or a pod has never been this easier.
With this system just getting your alarms and bankware from inside your luggage to setup ready for your rods seems almost graceful.
All buzz bars feature the new Quick Release (QR) system for your alarms or butt rests.
Alarms and rear rests can be attached to the buzz bars and released by a simple twist of the knurled collar.
Alarms can be added to or moved between 2 or 3 rod buzz bars or single sticks instantly
Perfect for the angler that fishes a variety of waters with different rod limits
QR system makes it easy to separate 3 rods on one buzz bar onto a 2 rod buzz bar and a single stick, if fishing a rod away from the main zone
The additional benefit of the QR system is that it allows the perfect alignment of alarms and rear rests without the need to use spacing washers that can loosen or compress over time.
Buzz bars feature a standard thread to attach to none QR banksticks
To make entire buzz bar quick release simply screw onto a QR bankstick and use the collar to “quick release” the bars.
16mm Black Anodized Aluminium construction
Adjustable buzz bars feature new reduced size and restyled Cam Lok with superior performance and looks
QR banksticks should not be forced into the ground using a buzz bar
Matrix Super Slinky Bankstick
Due to demand we developed a slimline range of stainless.
Great attention to detail has been paid, not only to design but to funtionality, quality and looks.
Although much slimmer that the Rock Solid range (the tube is 12mm in diameter) the Super Slinky range is still exceptionally strong.
The Super Slinky sticks all feature the new CAPTIVE thumbscrew that cannot be removed from the stick, the thumsbcrews can be locked up nice andf tight but for that extra security you can also use the new Torque Tool to nip them up that but tighter. Product Features
High quality stainless steel
British made
Long lasting
ESP Banksticks
ESP Bank sticks are available in four extending lengths – 9”-13”, 12”-19”, 15”-24” and 20” – 35” to cover most scenarios.
Super strong yet lightweight they are machined and assembled in ESP’s own UK factory.
Constructed using an extra-long machined stainless point and combined with 12mm diameter hard anodised aluminium they will penetrate even the hardest ground.
The extending inner section comprises solid 8mm carbon rod which reduces weight while providing exceptional strength.
The ergonomic ‘captive’ lever provides positive locking with just a fraction of a turn.
The threaded collar is designed to blend perfectly with ESP Buzz bars (available separately).
Korda Singlez Buzz Bars
This revolutionary rod support system is the brain-child of Korda boss Danny Fairbrass, and was designed in line with his vision and then produced for us in stainless steelby top engineering firm, JAG Products.
It can be used in any type of ground or even on platforms, and two rod and three rod versions are available, with a whole host of different ways of setting them up, thanks to different length uprights and buzz bars, plus you can even turn it into single banksticks if you want to.
The Singlez has literally turned rod support systems upside down, as the buzz bar is at the bottom resting on the ground, thus providing far more stability and allowing it to be pushed into the ground with your feet, and the uprights are screwed into that, providing perfect spacing and ensuring they are all straight – it looks like a multi-rod, single bankstick set-up, but without all the hassle!
Each set of uprights features a spike at the bottom – there is also a Spike Extension to make it longer for use on types of bank where it needs to be pushed further into the ground - that can be pushed into almost any type of ground using your body weight on the bars, and the addition of a Spike Ball Stabiliser provides extra stability.
If you are fishing on platforms, Stage Stands are available and are sold in pairs.
Singlez are so versatile that you could even fish them as single banksticks if you wished to, with the addition of spikes screwed into the uprights.
A T-Bar is also available, which you can screw a spike onto in order to create a hole to push your Singlez set-up into – if you’d rather not stand on the Buzz Bars to do this – and that comes with a carabiner clip so that it can double up as a weigh bar for your scales, plus means it can be clipped onto your luggage when not in use so there is no chance of it being mislaid.
Key features
Rod rest system
Designed by Danny Fairbrass
Engineered by JAG Products
Top quality stainless steel
Wide range of different options
Matrix Rock Solid Bankstick
The Rock Solid range is chunkier than your usual stainless, it is made from 16mm diameter tube and 20mm diameter solid.
It is pukka quality and will last for ever!
The bank stick threads on the snag bars are offset by 1 inch so that when your indicators drop down they do not smack into your sticks.
The bank sticks feature a stepped point to make it easier to get in to hard ground and all feature the new CAPTIVE thumbscrew that cannot be removed from the stick, the thumsbcrews can be locked up nice andf tight but for that extra security you can also use the new Torque Tool to nip them up that but tighter.
Product Features
High grade stainless steel
Chunkier that normal sticks
100% british made
Will last forever
Korda Singlez Lock It Tool
This multi-purpose tool has been designed to work in conjunction with the collars on Korda Singlez Uprights and many thumb screw banksticks on the market.
The tool can be used to tighten or loosen Singlez collars and thumb screws with ease, ensuring your set-up is as rock solid as it should be and can be stowed away quickly after your session.
The tool has a unique internal profile and extended grip making it easy to apply pressure to Singlez collars. In addition, a hook at the end of the tool is designed for lifting bucket lids and small magnets keep the tool closed when not in use.
Manufactured by JAG from high grade aluminium you can be sure this product has been engineered with quality and functionality in mind.
Comes with an anodised green finish and etched Korda branding.
Key features
Used to tighten or loosen Singlez collars and thumb screws
Easy to apply pressure to Singlez collars
Hook for lifting bucket lids
Magnetic closure
Manufactured by JAG from high grade aluminium
