Trakker

Trakker NXG Lead & Leader Pouch The NXG Lead and Leader Pouch is a purpose designed storage pouch for lead weights, leaders and accessories, perfectly complementing the rest of the award-winning NXG luggage range. Integrated internal zipped clear pocket storage pouch Internal mesh pocket on the lid Webbing carry handle Hard-wearing water resistant base Material: 600D polyester Dimensions: (L) 15cm x (W) 9cm x (H) 8cm

Read more less

Trakker NXG Buzzer Bar Bag 3 Rod The Trakker NXG 3 Rod Buzzer Bar Bag has been developed to keep your alarms safe while attached to your buzzer bar. Featuring internal Velcro-fastened pockets to store any bite alarm essentials such as spare batteries and indicators, it also features adjustable multi-position securing straps as well as twin-directional zips and a padded body with inner protection pad to keep your alarms in perfect condition. 

Product Features Protective Buzzer Bar and alarm bag Padded body with inner protection pad Twin-direction zip to open/close Adjustable multi-position buzz bar securing straps Internal Velcro-fastened pockets 
Technical SpecificationMaterial: 600-denier polyesterDimensions: L45cm x W20cm x D6cm

Read more less

Trakker Elastic Repair Kit (6 pieces) Designed for use on all Trakker shelters with elasticated pole joints, the Elastic Repair Kit, made from hardwearing polypropylene, is supplied in sets of six, allowing for easy fitting.PRODUCT FEATURES Replacement Elastic Kit for all Trakker Shelters with elasticated pole joints Six pieces supplied.

Read more less

Trakker NXG 3 Rod Padded Sleeve Trakker NXG 3 Rod 12ft Padded SleeveThe Trakker NXG 12 and 13ft 3-Rod Sleeves offer superb protection for your rods, and comfortably house big pit reels and rods with 50mm butt rings with webbing Velcro straps to retain rods while in transportation. Manufactured from 600-denier polyester, in a subtle shade of olive green with a reinforced, hardwearing base that can be simply wiped clean, it features a large outer pocket to accommodate a standard retention sling and landing net with space for a landing net pole in the spine of the sleeve. There’s also side housing space which has been designed to take two additional single rod sleeves, allowing you to create a 4-5 rod sleeve and has a small pocket to the base which is ideal for stashing leads at the end of your session. Will accommodate big pit reels and 50mm butt rings Neoprene handle Padded, adjustable and removable shoulder strap Reinforced with Nyplax material Two outer pockets Rear outer fitment to enable transportation of brollies Internally padded to protect individual rods Material: 600-denier polyester DIMENSIONS: 12FT L200cm Trakker NXG 3 Rod 13ft Padded SleeveThe Trakker NXG 12 and 13ft 3-Rod Sleeves offer superb protection for your rods, and comfortably house big pit reels and rods with 50mm butt rings with webbing Velcro straps to retain rods while in transportation. Manufactured from 600-denier polyester, in a subtle shade of olive green with a reinforced, hardwearing base that can be simply wiped clean, it features a large outer pocket to accommodate a standard retention sling and landing net with space for a landing net pole in the spine of the sleeve. There’s also side housing space which has been designed to take two additional single rod sleeves, allowing you to create a 4-5 rod sleeve and has a small pocket to the base which is ideal for stashing leads at the end of your session. 

Product Features Will accommodate big pit reels and 50mm butt rings Neoprene handle Padded, adjustable and removable shoulder strap Reinforced in Nyplax material Two outer pockets Rear outer fitment to enable transportation of brollies Internally padded to protect individual rods 
Technical SpecificationMaterial: 600-denier polyesterDimensions: L215cm

Read more less

Trakker Earth Hoody Featuring a stylish two-tone design, our Earth Hoody is made from a super-soft cotton/polyester blend, and incorporates chunky ribbing on the side panels, cuffs, pocket and hem for a comfort fit. Finished with subtle detailing including a leather embossed icon badge on the left breast, the Earth Hoody looks great when teamed with our Ripstop Combats, and Earth Bucket Hat. Two-tone design hoody Soft lined tonal hood Leather embossed icon badge Material: 60% Cotton 40% Polyester

Read more less

Trakker Hand Towel A large microfibre hand towel with an even larger range of benefits. Microfibre is incredibly absorbent (almost three times more so than cotton) while having quick-dry abilities and a compact nature, making it perfect for storage. Press-stud hanging loops enable it to be hung from trees or spod stations for quick access or easy drying. The printed Trakker logo is also displayed on the front of this carp fishing accessory. Key Features Large microfibre towel Super absorbent and quick-drying Lightweight and compact for storage Two press studded hanging loops Printed Trakker logo Dimensions: Approx 80 (L) x 40 (W) cm Weight: Approx 70g Material: 80% polyester/20% polyamide

Read more less

Trakker Butt Grabber Securely grip your rods through the most savage of takes  Minimalist design Two sizes cater for abbreviated (small) and full duplon/cork handles (large)   TECHNICAL SPECIFICATION: Dimensions: 2.5 (H) cm (not including thread) Weight: Approx 4g Material: Plastic

Read more less

Trakker Easylift Weigh Bar The Easylift Weigh Bar enables 2-handed hoisting of the scales for steady and accurate readings of all-important fish weights. While it’s sturdy, the Weigh Bar is very light when carrying in a rucksack. Features Duplon grips for a positive grip. PRODUCT FEATURES: Enables 2-handed hoisting of the scales for steady and accurate readings Lightweight and compact for transportation Duplon handles for secure grip when hands are wet TECHNICAL SPECIFICATION: Dimensions: 29 (L) x 4.5 (W) cm Weight: Approx 173g Material: Aluminium

Read more less

Trakker Tempest Brolly Insect Panel 100Specifically designed for the Tempest Brolly 100 to keep those annoying and sometimes biting bugs and insects out of your shelter when fishing with the door and sides rolled back, the Tempest Brolly 100 Insect Panel simply zips into the inside of the front of the shelter to give you an unrestricted view from the bivvy. It features tiebacks for the door and side panels and is supplied in a 210D carry-bag with T-pegs.Product Features. Zip-in Insect Panel for Tempest Brolly 100 Tie-backs for door and side panels Supplied with carrybag and T-pegs Technical Specifications.Material: B12 MeshWeight: Approx 0.55kgTransport size: 45 x 22cm 100TDesigned specifically for the Tempest Brolly 100T, this simple yet effective insect panel offers protection from those annoying bugs and insects while offering an unrestricted view. It features tiebacks for the door and side panels, and a twin-zip opening. Zip in insect panel specifically designed for Tempest Brolly 100T Tie backs for door and side panels Supplied with carry bag and T pegs Compatible with 202270 Tempest Brolly 100T  TECHNICAL SPECIFICATIONMaterial: Polyester meshWeight: Approx 0.5kgTransport size: 40 x 25cm

Read more less

Trakker Tempest Bivvy Skull Cap Wrap Aquatexx EV 1.0 100Transform your Tempest 100 Bivvy Aquatexx EV® into a twin-skin shelter with the Skull Cap Wrap, which works to reduce condensation and offer extra protection from the elements by creating a peak. Its extended sides and rear provide full top-to-bottom twin-skin coverage. The Tempest 100 Bivvy Skull Cap Wrap Aquatexx EV can be easily fitted in seconds. It uses a spigot system on the three front poles and is then simply pegged down around the bivvy. The back vents allow air flow through the shelter in warmer weather, and the Skull Cap Wrap will also keep things cooler in the bivvy. It features dual rod straps for convenient, safe placement of rods and rain gutter. The 2021 Tempest Aquatexx EV range of shelters and their accessories feature Aquatexx EV material to represent the best in breathable shelter material technology, and a hydrostatic head of 25,000 far surpasses anything else on the market. PRODUCT FEATURES: Specifically designed for the Tempest 100 Bivvy Aquatexx EV 1.0 Creates a peak to offer additional protection from the elements Reduces condensation and increases shade Rain gutter Quick and easy to fit Dual rod straps Adaptive Ventilation Technology – keeps air circulating to reduce condensation Aquatexx EV fabric – super-waterproof, breathable and hydrophobic Supplied in an Aquatexx EV™ zipped carrybag Compatible with 201520 Tempest 100 Bivvy Aquatexx EV TECHNICAL SPECIFICATIONMaterial: Aquatexx EV™Weight: Approx 4kgTransport size: 60 x 35cm 150Transform your Tempest 150 Bivvy Aquatexx EV into a twin-skin shelter with the Skull Cap Wrap, which works to reduce condensation and offer extra protection from the elements by creating a peak. Its extended sides and rear provide full top-to-bottom twin-skin coverage. The Tempest 150 Bivvy Skull Cap Wrap Aquatexx EV® can be easily fitted in seconds. It uses a spigot system on the three front poles and is then simply pegged down around the bivvy. The back vents allow air flow through the shelter in warmer weather, and the Skull Cap Wrap will also keep things cooler in the bivvy. It features dual rod straps for convenient and safe placement of rods and rain gutter. The 2021 Tempest Aquatexx EV range of shelters and accessories feature Aquatexx EV material to represent the best in breathable shelter material technology, and a hydrostatic head of 25,000 far surpasses anything else on the market.PRODUCT FEATURES: Specifically designed for the Tempest 150 Bivvy Aquatexx EV 1.0 Creates a peak offering additional protection from the elements Reduces condensation and increases shade Rain gutter Quick and easy to fit Dual rod straps Adaptive Ventilation Technology - keeps air circulating, reducing condensation Aquatexx EV fabric - super waterproof, breathable and hydrophobic Supplied in an Aquatexx EV™ zipped carry bag Compatible with 201529 Tempest 150 Bivvy Aquatexx EV 1.0 TECHNICAL SPECIFICATION Material: Aquatexx EVWeight: Approx 4.8kgTransport size: 68 x 40cm

Read more less

Trakker SLX V3 Bivvy Extended Wrap SLX 100 WrapTransform the SLX V3 into a triple skin shelter to offer the ultimate in warmth and comfort during the colder months, further reducing condensation and increasing heat retention. Manufactured from our upgraded 10,000mm Hydrostatic Head Polyester, the SLX V3 Bivvy Wrap creates a small porch area at the front of your bivvy to allow for greater space inside the bivvy, it also features a zipped rear vent for increased ventilation and dual-zipped doors which allow you to create a letterbox opening.Product Features. Transformes SLX V3 in to a triple skin shelter for ultimate warmth and comfort Reduces condensation and increases heat retention Zipped rear vent for increased ventilation Creates a small porch area in front of bivvy Dual-zipped doors allowing you to create a letterbox opening Tie-backs for door and side panels Dual rod straps Supplied with carrybag and T-pegs Upgraded 10,000mm Hydrostatic Head fabric 
Technical Specifications.Material: polyesterWeight: Approx 3.55kg (plus pegs weighing 0.9kg)Dimensions: Approx 130H x 265D x 300W cmTransport size: 50 x 32cmSLX 150 WrapTransform the SLX V3 into a triple skin shelter to offer the ultimate in warmth and comfort during the colder months, further reducing condensation and increasing heat retention. Manufactured from our upgraded 10,000mm Hydrostatic Head Polyester, the SLX V3 Bivvy Wrap creates a small porch area at the front of your bivvy to allow for greater space inside the bivvy, it also features a zipped rear vent for increased ventilation and dual-zipped doors which allow you to create a letterbox opening.Product Features. Transformes SLX V3 in to a triple skin shelter for ultimate warmth and comfort Reduces condensation and increases heat retention Zipped rear vent for increased ventilation Creates a small porch area in front of bivvy Dual-zipped doors allowing you to create a letterbox opening Tie-backs for door and side panels Dual rod straps Supplied with carrybag and T-pegs Upgraded 10,000mm Hydrostatic Head fabric Technical Specifications.Material: polyesterWeight: Approx 3.8kg (plus pegs weighing 0.9kg)Dimensions: Approx 150H x 305D x 320W cmTransport size: 55 x 35cm

Read more less

Trakker NXG Rod Sleeve NXG 10 foot Rod SleeveWith 10ft rods being highly popular for anglers who fish from boats or even those who just enjoy stalking, the Trakker NXG 10ft Rod Sleeve features a ¾ length zip to allow rods to be easily secured inside and protected during transit to and from the lake. Manufactured from 600-denier polyester and finished in a subtle shade of olive green, not only does it look great, but is also hard wearing and highly protective too. 

Product Features Single padded Rod Sleeve to accommodate a fully made up 10ft rod Duplon carry handles 3/4 length zip 
Technical SpecificationMaterial: 600-dennier polyesterDimensions: L160cm NXG 12 foot Rod Sleeve Designed to take fully made up singular 12ft rods, the NXG Rod Sleeves will comfortably house rods with 50mm butt rings and large, big pit reels attached. The padded sleeve has been manufactured from 600-denier polyester in olive green with D-clips to allow you to attach a padded shoulder strap. Product Features: Single padded sleeve to accommodate a made-up rod 10mm heavy-duty zip with double zip pullers Internal padding to protect the rod/reel in transit Technical Specification: Dimensions: 12ft – 200cm Material: 600D Polyester

Read more less